← Commit history

Initial commit: component/ina2332aipwr

Ray ·edd0636b11 ·
2 files changed +92
README.mdadded+58
@@ -0,0 +1,58 @@+# INA2332AIPWR++**Texas Instruments** · Instrumentation OpAmps · TSSOP-14++INA2332AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RGA | passive | Channel A external gain-set resistor node. Connect resistors R1 (to internal 10 kΩ tap) and R2 (to output) to set gain per G = 5 + 5(R2/R1); leave open for the internal G = 5 configuration. |+| 2 | VIN-A | input | Channel A inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to ≤10 mA if driven >0.5 V beyond the rails. |+| 3 | VIN+A | input | Channel A non-inverting differential signal input. High-impedance CMOS input (10^13 Ω || 3 pF), 0.5 pA typical bias current. |+| 4 | V- | power_in | Negative supply / ground for both channels. Tie to GND for single-supply operation or to the negative rail for bipolar supplies. Total V+ to V- must not exceed 7.5 V (absolute maximum). |+| 5 | VIN+B | input | Channel B non-inverting differential signal input. High-impedance CMOS input, 0.5 pA typical bias current. |+| 6 | VIN-B | input | Channel B inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to ≤10 mA if driven >0.5 V beyond the rails. |+| 7 | RGB | passive | Channel B external gain-set resistor node. Connect resistors R1/R2 to set gain per G = 5 + 5(R2/R1); leave open for the internal G = 5 configuration. |+| 8 | ShutdownB | input | Channel B shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel B (I_SD ≈ 0.01 µA typ); drive high (V_SD > 2.5 V) for normal operation. Channel returns to normal within microseconds. |+| 9 | VOUTB | output | Channel B rail-to-rail analog output. Swings to within 0.02 V of V+ (at G ≥ 10) and drives capacitive loads; short-circuit current +48/−32 mA typical. |+| 10 | REFB | input | Channel B output reference/offset input. The channel B output is referenced to this pin; commonly tied to mid-supply (V+/2) for single-supply bipolar signals, or to ground for unipolar signals. |+| 11 | V+ | power_in | Positive supply for both channels. Specified 2.7 V to 5.5 V (operating 2.5 V to 5.5 V); quiescent current 415 µA/channel typ, 490 µA max. |+| 12 | REFA | input | Channel A output reference/offset input. The channel A output is referenced to this pin; commonly tied to mid-supply (V+/2) for single-supply bipolar signals, or to ground for unipolar signals. |+| 13 | VOUTA | output | Channel A rail-to-rail analog output. Swings to within 0.02 V of V+ (at G ≥ 10) and drives capacitive loads; short-circuit current +48/−32 mA typical. |+| 14 | ShutdownA | input | Channel A shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel A (I_SD ≈ 0.01 µA typ); drive high (V_SD > 2.5 V) for normal operation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-14 |+| Category | Op-amp/Cmp |+| Pins | 14 |++## Ordering variants++Same part, different packaging or reel option.++- `INA2332AIPWR`+- `INA2332AIPWRIPWT`+- `INA2332AIPWRIDGKR`+- `INA2332AIPWRIDGKT`++## CAD (KiCad official)++- Symbol: `INA2332AIPWR`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/ina2332aipwr-datasheet.pdf) (22 pp, sha256 `b9356e8ad696bf4c`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina2332aipwr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ina2332aipwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Instrumentation OpAmps, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "op-amp-cmp",+    "ina2332aipwr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina2332aipwr.kicad_sym",+    "ina2332aipwr.kicad_mod",+    "ina2332aipwr.glb",+    "ina2332aipwr.step",+    "ina2332aipwr.lbr",+    "docs/hero.png",+    "docs/ina2332aipwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file