← Commit history
page.json+13−10@@ -32,19 +32,19 @@ "number": "1", "name": "RGA", "type": "passive",- "description": "Channel A external gain-set resistor node. Connect resistors R1 (to internal 10 k\u03a9 tap) and R2 (to output) to set gain per G = 5 + 5(R2/R1); leave open for the internal G = 5 configuration."+ "description": "Channel A external gain-set resistor node. Connect resistors R1 (to internal 10 kΩ tap) and R2 (to output) to set gain per G = 5 + 5(R2/R1); leave open for the internal G = 5 configuration." }, { "number": "2", "name": "VIN-A", "type": "input",- "description": "Channel A inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to \u226410 mA if driven >0.5 V beyond the rails."+ "description": "Channel A inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to ≤10 mA if driven >0.5 V beyond the rails." }, { "number": "3", "name": "VIN+A", "type": "input",- "description": "Channel A non-inverting differential signal input. High-impedance CMOS input (10^13 \u03a9 || 3 pF), 0.5 pA typical bias current."+ "description": "Channel A non-inverting differential signal input. High-impedance CMOS input (10^13 Ω || 3 pF), 0.5 pA typical bias current." }, { "number": "4",@@ -62,7 +62,7 @@ "number": "6", "name": "VIN-B", "type": "input",- "description": "Channel B inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to \u226410 mA if driven >0.5 V beyond the rails."+ "description": "Channel B inverting differential signal input. Diode-clamped to the supply rails; external signals must be current-limited to ≤10 mA if driven >0.5 V beyond the rails." }, { "number": "7",@@ -74,13 +74,13 @@ "number": "8", "name": "ShutdownB", "type": "input",- "description": "Channel B shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel B (I_SD \u2248 0.01 \u00b5A typ); drive high (V_SD > 2.5 V) for normal operation. Channel returns to normal within microseconds."+ "description": "Channel B shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel B (I_SD ≈ 0.01 µA typ); drive high (V_SD > 2.5 V) for normal operation. Channel returns to normal within microseconds." }, { "number": "9", "name": "VOUTB", "type": "output",- "description": "Channel B rail-to-rail analog output. Swings to within 0.02 V of V+ (at G \u2265 10) and drives capacitive loads; short-circuit current +48/\u221232 mA typical."+ "description": "Channel B rail-to-rail analog output. Swings to within 0.02 V of V+ (at G ≥ 10) and drives capacitive loads; short-circuit current +48/−32 mA typical." }, { "number": "10",@@ -92,7 +92,7 @@ "number": "11", "name": "V+", "type": "power_in",- "description": "Positive supply for both channels. Specified 2.7 V to 5.5 V (operating 2.5 V to 5.5 V); quiescent current 415 \u00b5A/channel typ, 490 \u00b5A max."+ "description": "Positive supply for both channels. Specified 2.7 V to 5.5 V (operating 2.5 V to 5.5 V); quiescent current 415 µA/channel typ, 490 µA max." }, { "number": "12",@@ -104,13 +104,13 @@ "number": "13", "name": "VOUTA", "type": "output",- "description": "Channel A rail-to-rail analog output. Swings to within 0.02 V of V+ (at G \u2265 10) and drives capacitive loads; short-circuit current +48/\u221232 mA typical."+ "description": "Channel A rail-to-rail analog output. Swings to within 0.02 V of V+ (at G ≥ 10) and drives capacitive loads; short-circuit current +48/−32 mA typical." }, { "number": "14", "name": "ShutdownA", "type": "input",- "description": "Channel A shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel A (I_SD \u2248 0.01 \u00b5A typ); drive high (V_SD > 2.5 V) for normal operation."+ "description": "Channel A shutdown control (active-low). Drive low (V_SD < 0.8 V) to shut down channel A (I_SD ≈ 0.01 µA typ); drive high (V_SD > 2.5 V) for normal operation." } ], "provenance": {@@ -192,5 +192,8 @@ "docs/ina2332aipwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }