component

INA228AQDGSRQ1

Public Made by Adom

by adom

Texas Instruments Power Supply Controllers, Monitors, MSOP-10-3mm. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentamplifiers/comparatorsina228aqdgsrq1board-derived

Verified INA228AQDGSRQ1

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record, 3 retired · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's INA228-Q1 datasheet (SLYS022A, revised June 2021)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SLYS022A, June 2020, revised June 2021; sha256 72bbe6e1bf379bb3 matches ti.com/lit/ds/symlink/ina228-q1.pdf fetched 2026-10-27); edition now recorded
  • ✓All 10 pins match Table 5-1 and Figure 5-1 (DGS 10-pin VSSOP, p.3) by number and name (A1, A0, ALERT, SDA, SCL, VS, GND, VBUS, IN-, IN+; the datasheet prints IN– with a typographic dash, ALERT has no overbar); no renames needed
  • ✓Pin types agree with Table 5-1: A0/A1/SCL digital inputs, SDA digital input/output (bidirectional), ALERT open-drain digital output, VBUS/IN+/IN- analog inputs, VS power supply, GND ground
  • ✓All 10 descriptions rewritten to Table 5-1 wording (p.3); the earlier text added facts not in the pin table (2.94 MHz, 16 addresses, 1 MΩ, decoupling advice)
  • ✓Orderable INA228AQDGSRQ1 is VSSOP (DGS), 10 pins, 2500 large T&R, marking 228Q (Package Option Addendum, p.43)
  • ✓Footprint vs DGS0010A (p.47-48): the open item asked to confirm the KiCad TSSOP-10_3x3mm_P0.5mm land against DGS; it has 10 pads 1.45 x 0.30 mm at e = 0.50 mm, as TI's land pattern example (10X 1.45 x 0.3, 8X 0.5); pad centres 4.30 mm apart vs TI's (4.4) reference, both cover the lead (E 4.75-5.05, L 0.4-0.7); pad width 0.30 over b 0.17-0.27; no exposed pad; pin 1 top-left, pins 1-5 down the left side as Figure 5-1
  • ✓3D body 4.90 x 3.00 x 1.10 mm against E 4.75-5.05 (lead span), D 2.9-3.1, A 1.1 max (p.47); seated on z = 0, centred on the pads
  • ✓DigiKey 296-INA228AQDGSRQ1TR-ND (tape and reel; DigiKey product URL names INA228AQDGSRQ1) and Mouser 595-INA228AQDGSRQ1 kept and added to specs
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Texas Instruments)
Verified files✓ ina228aqdgsrq1.kicad_sym✓ ina228aqdgsrq1.kicad_mod✓ ina228aqdgsrq1.step
16 Oct 2026Claude (AI build)Symbol pin names changed to the datasheet spelling (ALERT, VBUS, IN-, IN+); the board symb...superseded
reviewfor all variants
  • •Symbol pin names changed to the datasheet spelling (ALERT, VBUS, IN-, IN+); the board symbol had ~{Alert}, Vbus, Vin-, Vin+.
16 Oct 2026Claude (AI build)Footprint is KiCad Package_SO:TSSOP-10_3x3mm_P0.5mm while the datasheet package is DGS (VS...superseded
reviewfor all variants
  • •Footprint is KiCad Package_SO:TSSOP-10_3x3mm_P0.5mm while the datasheet package is DGS (VSSOP-10) and the KiCad INA228 symbol filters for VSSOP-10; confirm the land pattern against the DGS package drawing.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓10 of 10 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! ina228aqdgsrq1.kicad_sym! ina228aqdgsrq1.kicad_mod✓ ina228aqdgsrq1.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component metadata and pin table

Caleb ·b7c24a5b8e ·13d ago ·parent dda9ed8
1 file changed +185−30
page.json+185−30
page.json+185−30
@@ -1,28 +1,35 @@ {   "schema_version": 1,-  "slug": "ina228aqdgsrq1",   "type": "component",-  "kind": "component",+  "slug": "ina228aqdgsrq1",   "title": "INA228AQDGSRQ1",   "brief": "Texas Instruments Power Supply Controllers, Monitors, MSOP-10-3mm. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.",   "version": "0.1.0",-  "because": "No wiki page exists for this MPN: searched the wiki registry by MPN, slug and LCSC number on 2026-10-16 under every owner; no match.",-  "hero": {-    "type": "billboard",-    "headline": "INA228AQDGSRQ1",-    "subhead": "Texas Instruments Power Supply Controllers, Monitors",-    "screenshot": "docs/hero.png",-    "chrome": false-  },+  "license": "CC-BY-SA-4.0",+  "tags": [+    "component",+    "amplifiers/comparators",+    "ina228aqdgsrq1",+    "board-derived",+    "staged-for-validation"+  ],   "component": {     "mpn": "INA228AQDGSRQ1",     "manufacturer": "Texas Instruments",     "package": "MSOP-10-3mm",-    "pin_count": null,+    "pin_count": 10,     "category": "Amplifiers/Comparators",     "subcategory": "Power Supply Controllers, Monitors",-    "body_size": null,-    "parts": {},+    "datasheet": "https://www.ti.com/lit/ds/symlink/ina228-q1.pdf",+    "parts": {+      "symbol": "ina228aqdgsrq1.kicad_sym",+      "footprint": "ina228aqdgsrq1.kicad_mod",+      "model_3d": "ina228aqdgsrq1-etched.glb",+      "model_3d_plain": "ina228aqdgsrq1.glb",+      "model_3d_step": "ina228aqdgsrq1-etched.step",+      "model_3d_step_plain": "ina228aqdgsrq1.step",+      "lbr": "ina228aqdgsrq1.lbr"+    },     "distributor_links": {       "digikey": {         "part": "296-INA228AQDGSRQ1TR-ND",@@ -37,31 +44,179 @@         "url": "https://www.lcsc.com/product-detail/C5214669.html"       }     },-    "datasheet": "https://www.ti.com/lit/ds/symlink/ina228-q1.pdf"+    "pins": [+      {+        "number": "1",+        "name": "A1",+        "type": "input",+        "description": "I2C address select pin 1. Connect to GND, SCL, SDA, or VS to select one of 16 I2C slave addresses. [datasheet p.3]"+      },+      {+        "number": "2",+        "name": "A0",+        "type": "input",+        "description": "I2C address select pin 0. Connect to GND, SCL, SDA, or VS to select one of 16 I2C slave addresses. [datasheet p.3]"+      },+      {+        "number": "3",+        "name": "ALERT",+        "type": "open_collector",+        "description": "Open-drain alert output pin, default state is active low. Requires an external pull-up resistor to the digital supply rail. Asserts when programmed conversion-ready or threshold conditions are met. [datasheet p.3]"+      },+      {+        "number": "4",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Open-drain bidirectional I2C serial data line. Requires an external pull-up resistor; supports up to 2.94 MHz high-speed mode. [datasheet p.3]"+      },+      {+        "number": "5",+        "name": "SCL",+        "type": "input",+        "description": "I2C serial clock input. Requires an external pull-up resistor; supports up to 2.94 MHz high-speed mode. [datasheet p.3]"+      },+      {+        "number": "6",+        "name": "VS",+        "type": "power_in",+        "description": "Power supply input, 2.7 V to 5.5 V operating range (6 V absolute maximum). Bypass with a 0.1-µF ceramic capacitor to GND placed close to the pin. [datasheet p.3]"+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Connect to the system analog/digital ground plane. [datasheet p.3]"+      },+      {+        "number": "8",+        "name": "VBUS",+        "type": "input",+        "description": "Bus voltage sense input. Measures bus voltage from 0 V to 85 V (absolute maximum 85 V, common-mode independent). Input impedance ≈ 1 MΩ in active mode. [datasheet p.3]"+      },+      {+        "number": "9",+        "name": "IN-",+        "type": "input",+        "description": "Negative differential shunt-voltage sense input. For high-side current sensing, connect to the load side of the sense resistor; for low-side sensing, connect to ground side. Full-scale shunt range ±163.84 mV or ±40.96 mV; common-mode range -0.3 V to +85 V. [datasheet p.3]"+      },+      {+        "number": "10",+        "name": "IN+",+        "type": "input",+        "description": "Positive differential shunt-voltage sense input. For high-side current sensing, connect to the power-supply side of the sense resistor; for low-side sensing, connect to the load side. Full-scale shunt range ±163.84 mV or ±40.96 mV; common-mode range -0.3 V to +85 V. [datasheet p.3]"+      }+    ],+    "provenance": {+      "factory_chain": {+        "pipeline": "adom-parts (board-derived) 0.1",+        "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",+        "at": "2026-10-16"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/ina228-q1.pdf",+        "pages": 50,+        "sha256": "72bbe6e1bf379bb33c79399062c61f2d8a2f596e21585a67c3bea96c1b65b126",+        "source_tier": "mfr"+      },+      "cad": "KiCad official libraries (CC-BY-SA 4.0); footprint and symbol as used on Adom boards",+      "pins": {+        "total": 10,+        "described": 10,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "ina228aqdgsrq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          4.9,+          3.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "footprint_binding": "identity",+        "sha256": "39602ed75f3c6c524a0e4bab680480a2804b32aa5aa5eb0d979f088f4fb9c652",+        "checked": "2026-10-16",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      },+      {+        "file": "ina228aqdgsrq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          4.9,+          3.0,+          1.102+        ],+        "zmin_mm": -0.0,+        "footprint_binding": "identity",+        "sha256": "49e5ff90580344d8378778ceb28481b866f8e6a0fab73e96748da9fd5ea02802",+        "checked": "2026-10-16",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      }+    ]   },-  "tags": [-    "component",-    "amplifiers/comparators",-    "ina228aqdgsrq1",-    "board-derived",-    "staged-for-validation"+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "MSOP-10-3mm",+      "Category": "Amplifiers/Comparators",+      "Pins": "10",+      "LCSC": "C5214669"+    }+  },+  "variants": [],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"   ],   "discovery_triggers": [     "ina228aqdgsrq1",     "ina228aqdgsrq1"   ],-  "license": "CC-BY-SA-4.0",-  "visibility": {-    "public": false-  },+  "discovery_pitch": "INA228AQDGSRQ1 (Texas Instruments) component page: pinout, KiCad symbol, footprint and 3D.",   "author": {     "name": "Caleb",     "email": "[email protected]"   },-  "sample_prompts": [],-  "discovery_pitch": null,-  "metadata": {},-  "created_at": "2026-10-16T23:35:54.799Z",-  "updated_at": "2026-10-16T23:35:54.799Z",-  "org": "adom"+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "verification.json",+    "ina228aqdgsrq1.kicad_sym",+    "ina228aqdgsrq1.kicad_mod",+    "ina228aqdgsrq1-etched.glb",+    "ina228aqdgsrq1-etched.step",+    "ina228aqdgsrq1.glb",+    "ina228aqdgsrq1.step",+    "ina228aqdgsrq1.lbr",+    "docs/hero.png",+    "docs/ina228aqdgsrq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": {+    "public": false+  } }\ No newline at end of file