component
INA217AIDWR
Public Made by Adomby adom
Texas Instruments Instrumentation Amplifiers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# INA217AIDWR++**Texas Instruments** · Instrumentation Amplifiers · SOIC-16-300mil++INA217AIDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No internal connection. |+| 2 | RG1 | input | Gain-setting pin; for gains greater than 1, connect an external resistor between pins 2 and 15. |+| 3 | NC | unconnected | No internal connection. |+| 4 | VIN- | power_in | Inverting input. |+| 5 | VIN+ | power_in | Non-inverting input. |+| 6 | NC | unconnected | No internal connection. |+| 7 | V- | power_in | Negative power supply; the total V+ to V- supply is specified from ±4.5 V to ±18 V. |+| 8 | NC | unconnected | No internal connection. |+| 9 | NC | unconnected | No internal connection. |+| 10 | REF | input | Reference input for the output; it should be a low-impedance connection, since a few ohms in series degrade common-mode rejection. |+| 11 | VOUT | output | Amplifier output. |+| 12 | NC | unconnected | No internal connection. |+| 13 | V+ | power_in | Positive power supply; the total V+ to V- supply is specified from ±4.5 V to ±18 V. |+| 14 | NC | unconnected | No internal connection. |+| 15 | RG2 | input | Gain-setting pin; for gains greater than 1, connect an external resistor between pins 2 and 15. |+| 16 | NC | unconnected | No internal connection. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Amplifiers/Comparators |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `INA217AIDWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `ina217aidwr-etched.step` / `ina217aidwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina217aidwr.step` / `ina217aidwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina217) (25 pp, sha256 `0db5c403c1e22481`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina217aidwr-datasheet.pdf)
page.jsonadded+247@@ -0,0 +1,247 @@+{+ "slug": "ina217aidwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Instrumentation Amplifiers, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ina217aidwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ina217aidwr.kicad_sym",+ "ina217aidwr.kicad_mod",+ "ina217aidwr.glb",+ "ina217aidwr.step",+ "ina217aidwr.lbr",+ "docs/hero.png",+ "docs/ina217aidwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ina217aidwr-hero.glb",+ "ina217aidwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "INA217AIDWR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16-300mil",+ "pin_count": 16,+ "category": "Amplifiers/Comparators",+ "subcategory": "Instrumentation Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ina217",+ "parts": {+ "symbol": "ina217aidwr.kicad_sym",+ "footprint": "ina217aidwr.kicad_mod",+ "model_3d": "ina217aidwr-hero.glb",+ "model_3d_plain": "ina217aidwr.glb",+ "model_3d_step": "ina217aidwr-etched.step",+ "model_3d_step_plain": "ina217aidwr.step",+ "lbr": "ina217aidwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C1849416",+ "digikey": "296-INA217AIDWRTR-ND",+ "mouser": "595-INA217AIDWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T23:46:57Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-INA217AIDWRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-INA217AIDWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "2",+ "name": "RG1",+ "type": "input",+ "description": "Gain-setting pin; for gains greater than 1, connect an external resistor between pins 2 and 15."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "4",+ "name": "VIN–",+ "type": "power_in",+ "description": "Inverting input."+ },+ {+ "number": "5",+ "name": "VIN+",+ "type": "power_in",+ "description": "Non-inverting input."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "7",+ "name": "V–",+ "type": "power_in",+ "description": "Negative power supply; the total V+ to V- supply is specified from ±4.5 V to ±18 V."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "9",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "10",+ "name": "REF",+ "type": "input",+ "description": "Reference input for the output; it should be a low-impedance connection, since a few ohms in series degrade common-mode rejection."+ },+ {+ "number": "11",+ "name": "VOUT",+ "type": "output",+ "description": "Amplifier output."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "13",+ "name": "V+",+ "type": "power_in",+ "description": "Positive power supply; the total V+ to V- supply is specified from ±4.5 V to ±18 V."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "15",+ "name": "RG2",+ "type": "input",+ "description": "Gain-setting pin; for gains greater than 1, connect an external resistor between pins 2 and 15."+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet's pin table for the 8-pin SOIC/PDIP section labels its gain-set note 'between pins 2 a; Page 4 pin tables have mislabeled headings. The 16-entry table is headed 'PDIP' and the 8-entry tabl; The REF low-impedance note on page 10 refers to 'pin 5', which is the 8-pin numbering. For the 16-pi"+ ],+ "pages_sent": 25,+ "cost_usd": 0.1017,+ "at": "2026-10-07T23:46:40"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ina217",+ "pages": 25,+ "sha256": "0db5c403c1e22481",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ina217aidwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina217aidwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "ee72d8cc02a6c9b8c76c01d335d84e9e82e13e101663e4accd6460052080ebdb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}