← Commit history

Publish 0.2.1

Ray ·a6beb1aa3c · ·parent a589cbb
4 files changed +381−11
ina213aidckr-hero.glbadded
⋯ 1 unchanged line ⋯
ina213aidckr-hero.overlay.jsonadded+216
@@ -0,0 +1,216 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "INA213AIDCKR",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 6,+      "span_mm": 2.7,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 6,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.25,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -1.05,+      1.05,+      -0.762,+      0.762+    ],+    "pads_bbox_mm": [+      -1.35,+      1.35,+      -0.825,+      0.825+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "ina213aidckr-etched.glb",+    "glb_sha256": "b5928b43bed658ac72d001cefbe4601554a1cb48d2ed8c7cc8f5a22f7791585d",+    "footprint": "ina213aidckr.kicad_mod",+    "footprint_sha256": "0659d885e00b786968c3ba29152b808777240a91c1fb49ab8d814eb03530115c",+    "pins": "page.json component.pins",+    "pins_sha256": "dbe3d992c1a72c801c2daab4b8444b3cb24ca4bb52d9d651620d1783a0d4a1cb"+  },+  "generator": "adom-wiki 1.8.30 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "REF",+      "x": -1.45,+      "y": -0.65,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "GND",+      "x": -1.45,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "V+",+      "x": -1.45,+      "y": 0.65,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "IN+",+      "x": 1.45,+      "y": 0.65,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "IN-",+      "x": 1.45,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "OUT",+      "x": 1.45,+      "y": -0.65,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -0.8375,+        -0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -0.8375,+        0.0+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -0.8375,+        0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        0.8375,+        0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        0.8375,+        0.0+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        0.8375,+        -0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    }+  ]+}
package.json+155−4
@@ -1,6 +1,6 @@ {   "slug": "ina213aidckr",-  "version": "0.2.0",+  "version": "0.2.1",   "type": "component",   "description": "Texas Instruments Current-Sensing Amplifiers, SC-70-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -20,11 +20,162 @@     "ina213aidckr.kicad_mod",     "ina213aidckr.glb",     "ina213aidckr.step",+    "ina213aidckr-etched.step",     "ina213aidckr.lbr",     "docs/hero.png",     "docs/ina213aidckr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "pads.json"-  ]-}\ No newline at end of file+    "pads.json",+    "ina213aidckr-hero.glb",+    "ina213aidckr-hero.overlay.json"+  ],+  "component": {+    "mpn": "INA213AIDCKR",+    "manufacturer": "Texas Instruments",+    "package": "SC-70-6",+    "pin_count": 6,+    "category": "Op-amp/Cmp",+    "subcategory": "Current-Sensing Amplifiers",+    "datasheet": "https://www.ti.com/lit/ds/symlink/ina213ai.pdf",+    "parts": {+      "symbol": "ina213aidckr.kicad_sym",+      "footprint": "ina213aidckr.kicad_mod",+      "model_3d": "ina213aidckr-hero.glb",+      "model_3d_plain": "ina213aidckr.glb",+      "model_3d_step": "ina213aidckr-etched.step",+      "model_3d_step_plain": "ina213aidckr.step",+      "lbr": "ina213aidckr.lbr"+    },+    "distributor_links": {+      "lcsc": "C129346"+    },+    "pins": [+      {+        "number": "1",+        "name": "REF",+        "type": "input",+        "description": "Reference voltage input. Sets the output voltage bias so bidirectional (positive/negative) shunt currents can be represented on the single-supply output. Valid range 0 V to V+."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference (0 V)."+      },+      {+        "number": "3",+        "name": "V+",+        "type": "power_in",+        "description": "Positive power supply, 2.7 V to 26 V. Quiescent current is 100 uA (maximum). Decouple with 0.01 uF to 0.1 uF bypass capacitor to GND."+      },+      {+        "number": "4",+        "name": "IN+",+        "type": "input",+        "description": "Non-inverting analog input. Connects to the supply (high-potential) side of the external current-sense shunt resistor. Common-mode range -0.3 V to 26 V, independent of V+."+      },+      {+        "number": "5",+        "name": "IN-",+        "type": "input",+        "description": "Inverting analog input. Connects to the load (low-potential) side of the external current-sense shunt resistor. Common-mode range -0.3 V to 26 V, independent of V+."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "Analog output voltage. VOUT = (ILOAD x RSHUNT) x Gain + VREF, where Gain = 50 V/V for INA213. Rail-to-rail output swings from (VGND + 5 mV) up to (V+) - 0.05 V with a 10 kOhm load."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "docs/ina213aidckr-datasheet.pdf",+        "pages": 44,+        "sha256": "1945a0dd677d51e1",+        "source_tier": "mfr",+        "maker_url_dead": "https://www.ti.com/lit/ds/symlink/ina213ai.pdf",+        "citation": "Texas Instruments datasheet",+        "citation_note": "maker link no longer resolves; copy stored with this page"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 6,+        "described": 6,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "pin1": {+      "pad": "1",+      "at": [+        -0.8375,+        -0.65+      ],+      "corner": "top-left",+      "source": "silk-marker",+      "derived_from": "SOT-363_SC-70-6@sha256:0659d885e00b7869",+      "mark": "drawn"+    },+    "models_3d": [+      {+        "file": "ina213aidckr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "045cc95e18ee7a13d1623c3ce6604fc833049bdb4f952f68c26e3c5767d122e4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ina213aidckr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "745c01f6f595a2465bbf4712c1bba091711d64e6f4b619ae320685d6c0e98a89",+        "checked": "2026-10-26",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "INA213AIDCKR",+  "brief": "Texas Instruments Current-Sensing Amplifiers, SC-70-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "SC-70-6",+      "Category": "Op-amp/Cmp",+      "Pins": "6"+    }+  },+  "discovery_triggers": [+    "ina213aidckr"+  ],+  "discovery_pitch": "INA213AIDCKR (Texas Instruments) component page with datasheet-verified CAD.",+  "visibility": "public"+}
page.json+10−7
@@ -4,7 +4,7 @@   "slug": "ina213aidckr",   "title": "INA213AIDCKR",   "brief": "Texas Instruments Current-Sensing Amplifiers, SC-70-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.2.0",+  "version": "0.2.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -183,11 +183,12 @@     "docs/hero.png",     "docs/ina213aidckr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "pads.json",+    "ina213aidckr-hero.glb",+    "ina213aidckr-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "INA213AIDCKR",@@ -206,5 +207,7 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-24T22:38:43.541Z"-}+  "updated_at": "2026-09-24T22:38:43.541Z",+  "description": "Texas Instruments Current-Sensing Amplifiers, SC-70-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file