← Commit history

Initial commit: component/ina200aidr

Ray ·829f2d76f8 ·
2 files changed +86
README.mdadded+52
@@ -0,0 +1,52 @@+# INA200AIDR++**Texas Instruments** · Current-Sensing Amplifiers · SOIC-8++INA200AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VS | power_in | Analog power supply input, 2.7 V to 18 V. Quiescent current up to 1800 uA (max). Bypass with a 0.1 uF ceramic capacitor close to the pin. |+| 2 | OUT | output | Analog voltage output proportional to the shunt voltage times the fixed gain (20 V/V for INA200A). Output can swing rail-to-rail within specified swing limits; drives loads down to the specified minimum resistance. |+| 3 | CMPIN | input | Non-inverting comparator input. Typically driven by a resistor divider from OUT to set the current trip threshold against the internal 0.6 V reference. |+| 4 | GND | power_in | Device ground reference for the current-shunt monitor amplifier and the comparator/reference block. |+| 5 | RESET | input | Active-low comparator latch reset input. Tie low (or leave floating) to run the comparator in transparent (non-latched) mode; drive high to enable latching of the comparator output after a trip event. |+| 6 | CMPOUT | output | Open-drain comparator output. Pulls low when the CMPIN voltage exceeds the 0.6 V internal reference (over-current alert). Requires an external pull-up resistor to the desired logic rail. |+| 7 | VIN- | input | Inverting current-shunt monitor input. Connect to the low-side (load-side) terminal of the external sense resistor. Common-mode range -16 V to +80 V independent of VS. |+| 8 | VIN+ | input | Non-inverting current-shunt monitor input. Connect to the high-side (bus-side) terminal of the external sense resistor. Common-mode range -16 V to +80 V independent of VS. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Op-amp/Cmp |+| Pins | 8 |++## Ordering variants++- `INA200AIDR`+- `INA200AIDRAIDG4`+- `INA200AIDRG4`+- `INA200AIDRAIDGKR`+- `INA200AIDRAIDGK`++## CAD (KiCad official)++- Symbol: `INA200AIDR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/ina200aidr-datasheet.pdf) (None pp, sha256 `de23afc2a96c6aa0`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina200aidr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ina200aidr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Current-Sensing Amplifiers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "op-amp-cmp",+    "ina200aidr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina200aidr.kicad_sym",+    "ina200aidr.kicad_mod",+    "ina200aidr.glb",+    "ina200aidr.step",+    "ina200aidr.lbr",+    "docs/hero.png",+    "docs/ina200aidr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file