← Commit history
Publish 0.2.1
4 files changed
+379−11
ina199a1dckr-hero.glbadded⋯ 1 unchanged line ⋯
ina199a1dckr-hero.overlay.jsonadded+216@@ -0,0 +1,216 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "INA199A1DCKR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 6,+ "span_mm": 2.7,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 6,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.25,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.05,+ 1.05,+ -0.762,+ 0.762+ ],+ "pads_bbox_mm": [+ -1.35,+ 1.35,+ -0.825,+ 0.825+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "ina199a1dckr-etched.glb",+ "glb_sha256": "d323add4665794f393dde188ccff992219b60522240668f268225fedcfccba4d",+ "footprint": "ina199a1dckr.kicad_mod",+ "footprint_sha256": "0659d885e00b786968c3ba29152b808777240a91c1fb49ab8d814eb03530115c",+ "pins": "page.json component.pins",+ "pins_sha256": "dbe3d992c1a72c801c2daab4b8444b3cb24ca4bb52d9d651620d1783a0d4a1cb"+ },+ "generator": "adom-wiki 1.8.30 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "REF",+ "x": -1.45,+ "y": -0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "GND",+ "x": -1.45,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "V+",+ "x": -1.45,+ "y": 0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "IN+",+ "x": 1.45,+ "y": 0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "IN-",+ "x": 1.45,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "OUT",+ "x": 1.45,+ "y": -0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -0.8375,+ -0.65+ ],+ "size_mm": [+ 1.025,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -0.8375,+ 0.0+ ],+ "size_mm": [+ 1.025,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -0.8375,+ 0.65+ ],+ "size_mm": [+ 1.025,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ 0.8375,+ 0.65+ ],+ "size_mm": [+ 1.025,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 0.8375,+ 0.0+ ],+ "size_mm": [+ 1.025,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 0.8375,+ -0.65+ ],+ "size_mm": [+ 1.025,+ 0.35+ ],+ "rot": 0.0+ }+ ]+}
package.json+153−4@@ -1,6 +1,6 @@ { "slug": "ina199a1dckr",- "version": "0.2.0",+ "version": "0.2.1", "type": "component", "description": "Texas Instruments Current-Sensing Amplifiers, SOT-363(SC-70-6). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -20,11 +20,160 @@ "ina199a1dckr.kicad_mod", "ina199a1dckr.glb", "ina199a1dckr.step",+ "ina199a1dckr-etched.step", "ina199a1dckr.lbr", "docs/hero.png", "docs/ina199a1dckr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "pads.json"- ]-}+ "pads.json",+ "ina199a1dckr-hero.glb",+ "ina199a1dckr-hero.overlay.json"+ ],+ "component": {+ "mpn": "INA199A1DCKR",+ "manufacturer": "Texas Instruments",+ "package": "SOT-363(SC-70-6)",+ "pin_count": 6,+ "category": "Op-amp/Cmp",+ "subcategory": "Current-Sensing Amplifiers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ina199a1.pdf",+ "parts": {+ "symbol": "ina199a1dckr.kicad_sym",+ "footprint": "ina199a1dckr.kicad_mod",+ "model_3d": "ina199a1dckr-hero.glb",+ "model_3d_plain": "ina199a1dckr.glb",+ "model_3d_step": "ina199a1dckr-etched.step",+ "model_3d_step_plain": "ina199a1dckr.step",+ "lbr": "ina199a1dckr.lbr"+ },+ "distributor_links": {+ "digikey": "296-27329-2-ND",+ "lcsc": "C59135"+ },+ "pins": [+ {+ "number": "1",+ "name": "REF",+ "type": "input",+ "description": "Reference input. Sets the output voltage when the differential input (IN+ − IN−) is zero. Typically tied to GND for unidirectional sensing or driven to V+/2 for bidirectional sensing. Allowed range: GND-0.3 V to (V+)+0.3 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / negative supply return for the device."+ },+ {+ "number": "3",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply input, +2.7 V to +26 V. Quiescent current is 100 µA (max). A 0.01 µF to 0.1 µF bypass capacitor to GND is recommended."+ },+ {+ "number": "4",+ "name": "IN+",+ "type": "input",+ "description": "Non-inverting differential input. Connect to the load side (or high side, depending on topology) of the external current-sense resistor RSHUNT. Common-mode range -0.3 V to +26 V independent of V+."+ },+ {+ "number": "5",+ "name": "IN-",+ "type": "input",+ "description": "Inverting differential input. Connect to the supply side of the external current-sense resistor RSHUNT. Common-mode range -0.3 V to +26 V independent of V+."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "Analog voltage output. VOUT = REF + Gain × (IN+ − IN−); Gain = 50 V/V for the A1 variant. Rail-to-rail output, drives loads ≥ 10 kΩ to GND."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/ina199a1.pdf",+ "pages": 28,+ "sha256": "f7222d6189aa059a",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "pin1": {+ "pad": "1",+ "at": [+ -0.8375,+ -0.65+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOT-363_SC-70-6@sha256:0659d885e00b7869",+ "mark": "drawn"+ },+ "models_3d": [+ {+ "file": "ina199a1dckr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "045cc95e18ee7a13d1623c3ce6604fc833049bdb4f952f68c26e3c5767d122e4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina199a1dckr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7a28cc20f1d77164a24deca963d93b6c4e0c8440bfdeb2150e1068aaa67fa9f6",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "INA199A1DCKR",+ "brief": "Texas Instruments Current-Sensing Amplifiers, SOT-363(SC-70-6). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOT-363(SC-70-6)",+ "Category": "Op-amp/Cmp",+ "Pins": "6"+ }+ },+ "discovery_triggers": [+ "ina199a1dckr"+ ],+ "discovery_pitch": "INA199A1DCKR (Texas Instruments) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "ina199a1dckr", "title": "INA199A1DCKR", "brief": "Texas Instruments Current-Sensing Amplifiers, SOT-363(SC-70-6). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.2.0",+ "version": "0.2.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -181,11 +181,12 @@ "docs/hero.png", "docs/ina199a1dckr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json",+ "ina199a1dckr-hero.glb",+ "ina199a1dckr-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "INA199A1DCKR",@@ -204,5 +205,7 @@ "kind": "packaging" } ],- "updated_at": "2026-09-24T22:37:06.332Z"-}+ "updated_at": "2026-09-24T22:37:06.332Z",+ "description": "Texas Instruments Current-Sensing Amplifiers, SOT-363(SC-70-6). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}