← Commit history
ina159aidgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+93−13
package.json+51−11@@ -68,23 +68,23 @@ "number": "1", "name": "REF 1", "type": "passive",- "description": "Reference input 1 of the on-chip two-resistor reference divider, typically grounded or tied to VREF for mid-supply biasing; pin voltage must stay within (V\u2212) \u2212 0.5V to (V+) + 0.5V."+ "description": "Reference input 1 of the on-chip two-resistor reference divider, typically grounded or tied to VREF for mid-supply biasing; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V." }, { "number": "2",- "name": "\u2212IN",+ "name": "−IN", "type": "input",- "description": "Inverting signal input of the difference amplifier (gain 0.2), rated for \u00b130V maximum input voltage."+ "description": "Inverting signal input of the difference amplifier (gain 0.2), rated for ±30V maximum input voltage." }, { "number": "3", "name": "+IN", "type": "input",- "description": "Noninverting signal input of the difference amplifier (gain 0.2), rated for \u00b130V maximum input voltage."+ "description": "Noninverting signal input of the difference amplifier (gain 0.2), rated for ±30V maximum input voltage." }, { "number": "4",- "name": "V\u2212",+ "name": "V−", "type": "power_in", "description": "Negative supply, or ground in single-supply operation; total supply range is +1.8V to +5.5V." },@@ -92,25 +92,25 @@ "number": "5", "name": "SENSE", "type": "input",- "description": "Output sense pin of the feedback network, connected to OUT in the typical application; pin voltage must stay within (V\u2212) \u2212 0.5V to (V+) + 0.5V."+ "description": "Output sense pin of the feedback network, connected to OUT in the typical application; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V." }, { "number": "6", "name": "OUT", "type": "output",- "description": "Amplifier output with continuous short-circuit protection and \u00b160mA continuous current limit."+ "description": "Amplifier output with continuous short-circuit protection and ±60mA continuous current limit." }, { "number": "7", "name": "V+", "type": "power_in",- "description": "Positive supply, operating range +1.8V to +5.5V total supply, with a 0.1\u00b5F bypass capacitor placed closely across the supply pins."+ "description": "Positive supply, operating range +1.8V to +5.5V total supply, with a 0.1µF bypass capacitor placed closely across the supply pins." }, { "number": "8", "name": "REF 2", "type": "passive",- "description": "Reference input 2 of the on-chip two-resistor reference divider, typically connected to VREF; pin voltage must stay within (V\u2212) \u2212 0.5V to (V+) + 0.5V."+ "description": "Reference input 2 of the on-chip two-resistor reference divider, typically connected to VREF; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V." } ], "provenance": {@@ -145,6 +145,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina159aidgkr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina159aidgkr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "9c5de3d8d105f549e80ed7dfac3511b772ddf3140d5bef880c576883ab8706a6",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -130,7 +130,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina159aidgkr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina159aidgkr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2.0,+ 0.85+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "9c5de3d8d105f549e80ed7dfac3511b772ddf3140d5bef880c576883ab8706a6",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -177,4 +217,4 @@ "visibility": { "public": true }-}+}