← Commit history
page.json+13−10@@ -53,23 +53,23 @@ "number": "1", "name": "REF 1", "type": "passive",- "description": "Reference input 1 of the on-chip two-resistor reference divider, typically grounded or tied to VREF for mid-supply biasing; pin voltage must stay within (V\u2212) \u2212 0.5V to (V+) + 0.5V."+ "description": "Reference input 1 of the on-chip two-resistor reference divider, typically grounded or tied to VREF for mid-supply biasing; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V." }, { "number": "2",- "name": "\u2212IN",+ "name": "−IN", "type": "input",- "description": "Inverting signal input of the difference amplifier (gain 0.2), rated for \u00b130V maximum input voltage."+ "description": "Inverting signal input of the difference amplifier (gain 0.2), rated for ±30V maximum input voltage." }, { "number": "3", "name": "+IN", "type": "input",- "description": "Noninverting signal input of the difference amplifier (gain 0.2), rated for \u00b130V maximum input voltage."+ "description": "Noninverting signal input of the difference amplifier (gain 0.2), rated for ±30V maximum input voltage." }, { "number": "4",- "name": "V\u2212",+ "name": "V−", "type": "power_in", "description": "Negative supply, or ground in single-supply operation; total supply range is +1.8V to +5.5V." },@@ -77,25 +77,25 @@ "number": "5", "name": "SENSE", "type": "input",- "description": "Output sense pin of the feedback network, connected to OUT in the typical application; pin voltage must stay within (V\u2212) \u2212 0.5V to (V+) + 0.5V."+ "description": "Output sense pin of the feedback network, connected to OUT in the typical application; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V." }, { "number": "6", "name": "OUT", "type": "output",- "description": "Amplifier output with continuous short-circuit protection and \u00b160mA continuous current limit."+ "description": "Amplifier output with continuous short-circuit protection and ±60mA continuous current limit." }, { "number": "7", "name": "V+", "type": "power_in",- "description": "Positive supply, operating range +1.8V to +5.5V total supply, with a 0.1\u00b5F bypass capacitor placed closely across the supply pins."+ "description": "Positive supply, operating range +1.8V to +5.5V total supply, with a 0.1µF bypass capacitor placed closely across the supply pins." }, { "number": "8", "name": "REF 2", "type": "passive",- "description": "Reference input 2 of the on-chip two-resistor reference divider, typically connected to VREF; pin voltage must stay within (V\u2212) \u2212 0.5V to (V+) + 0.5V."+ "description": "Reference input 2 of the on-chip two-resistor reference divider, typically connected to VREF; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V." } ], "provenance": {@@ -173,5 +173,8 @@ "docs/ina159aidgkr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }