← Commit history
ina157u: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -53,25 +53,25 @@ "number": "1", "name": "Ref", "type": "input",- "description": "Reference voltage input terminal; output voltage level is referred to this pin such that a voltage applied here will be summed with the output signal; source impedance should be less than 10\u03a9 to maintain common-mode rejection."+ "description": "Reference voltage input terminal; output voltage level is referred to this pin such that a voltage applied here will be summed with the output signal; source impedance should be less than 10Ω to maintain common-mode rejection." }, { "number": "2",- "name": "\u2013In",+ "name": "–In", "type": "input",- "description": "Negative differential input terminal; input common-mode voltage range is 3(V+)-7.5V to 3(V-)+7.5V; input impedance is 24 k\u03a9."+ "description": "Negative differential input terminal; input common-mode voltage range is 3(V+)-7.5V to 3(V-)+7.5V; input impedance is 24 kΩ." }, { "number": "3", "name": "+In", "type": "input",- "description": "Positive differential input terminal; input common-mode voltage range is 3(V+)-7.5V to 3(V-)+7.5V; input impedance is 24 k\u03a9."+ "description": "Positive differential input terminal; input common-mode voltage range is 3(V+)-7.5V to 3(V-)+7.5V; input impedance is 24 kΩ." }, { "number": "4",- "name": "V\u2013",+ "name": "V–", "type": "power_in",- "description": "Negative power supply voltage; rated supply voltage \u00b115V, operating voltage range \u00b14V to \u00b118V."+ "description": "Negative power supply voltage; rated supply voltage ±15V, operating voltage range ±4V to ±18V." }, { "number": "5",@@ -83,13 +83,13 @@ "number": "6", "name": "Output", "type": "output",- "description": "Voltage output terminal; output voltage swing from (V+)-1.8V to (V-)+1.6V, maximum continuous output current \u00b160 mA to ground, maximum stable capacitive load 500 pF."+ "description": "Voltage output terminal; output voltage swing from (V+)-1.8V to (V-)+1.6V, maximum continuous output current ±60 mA to ground, maximum stable capacitive load 500 pF." }, { "number": "7", "name": "V+", "type": "power_in",- "description": "Positive power supply voltage; rated supply voltage \u00b115V, operating voltage range \u00b14V to \u00b118V."+ "description": "Positive power supply voltage; rated supply voltage ±15V, operating voltage range ±4V to ±18V." }, { "number": "8",@@ -132,6 +132,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina157u.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina157u-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "145aace19ea30642ed8937ead9c88ca598d3573287f31ce60b2eda9ed1146f03",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -117,7 +117,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina157u.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina157u-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "145aace19ea30642ed8937ead9c88ca598d3573287f31ce60b2eda9ed1146f03",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -165,4 +205,4 @@ "public": true }, "updated_at": "2026-09-24T22:32:42.768Z"-}+}