← Commit history

ina146ua: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·ff3a80d7b6 · ·parent afff658
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "INA146UA",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Differential OpAmps",+    "parts": {+      "symbol": "ina146ua.kicad_sym",+      "footprint": "ina146ua.kicad_mod",+      "model_3d": "ina146ua-etched.glb",+      "model_3d_plain": "ina146ua.glb",+      "model_3d_step": "ina146ua-etched.step",+      "model_3d_step_plain": "ina146ua.step",+      "lbr": "ina146ua.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "Ref",+        "type": "input",+        "description": "Reference input for the output amplifier A2. Voltage applied here is summed with the output signal and sets the output zero reference; source impedance should be less than 10Ω to preserve CMR. Also serves as an offset trim node (±15mV RTI adjustment range with the suggested trim network)."+      },+      {+        "number": "2",+        "name": "VIN-",+        "type": "input",+        "description": "Inverting differential signal input. Connects through internal R1 = 100kΩ (with R2 = 10kΩ feedback) to the A1 difference-amplifier inverting node; input differential/common-mode voltages up to ±100V are supported (voltage divider ratio 10:1). Input impedance to this pin is approximately 91.7kΩ differential."+      },+      {+        "number": "3",+        "name": "VIN+",+        "type": "input",+        "description": "Non-inverting differential signal input. Connects through internal R3 = 100kΩ to A1's non-inverting node (with R4 = 10kΩ to Ref); supports ±100V signal inputs. Differential input impedance approximately 110kΩ; common-mode impedance approximately 55kΩ."+      },+      {+        "number": "4",+        "name": "V-",+        "type": "power_in",+        "description": "Negative supply rail. Accepts dual supplies of ±2.25V to ±18V (operating down to ±1.35V) or single-supply operation with V+ up to 36V above V-. Bypass with 0.1µF close to the pin."+      },+      {+        "number": "5",+        "name": "RG",+        "type": "passive",+        "description": "Inverting input of the output buffer amplifier A2 and gain-set node. External resistors RG1 (to ground) and RG2 (to VO) set the overall gain G = 0.1 × (1 + RG2/RG1); RG2 = 10kΩ with RG1 open gives unity buffer gain (overall G = 0.1V/V). Design for approximately 10kΩ parallel resistance for proper bias current cancellation."+      },+      {+        "number": "6",+        "name": "VO",+        "type": "output",+        "description": "Output of the amplifier chain (A2 output). Delivers ±15mA short-circuit current, stable with up to 1000pF load capacitance. Output swing is (V-)+0.15V to (V+)-1V at RL=100kΩ (G=1)."+      },+      {+        "number": "7",+        "name": "V+",+        "type": "power_in",+        "description": "Positive supply rail. Accepts dual supplies of ±2.25V to ±18V or single supply 4.5V to 36V referenced to V-. Quiescent current is typically ±570µA. Bypass with 0.1µF close to the pin."+      },+      {+        "number": "8",+        "name": "VO1",+        "type": "output",+        "description": "Output of the first-stage difference amplifier A1, taken before the internal 10kΩ series resistor (R5) that drives A2's non-inverting input. Available for applications such as filtering (e.g. capacitor at VO1 forms an active filter with R5) or precision current-source configurations."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}