← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# INA146UA++**Texas Instruments** · Differential OpAmps · SOIC-8++INA146UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Ref | input | Reference input for the output amplifier A2. Voltage applied here is summed with the output signal and sets the output zero reference; source impedance should be less than 10Ω to preserve CMR. Also serves as an offset trim node (±15mV RTI adjustment range with the suggested trim network). |+| 2 | VIN- | input | Inverting differential signal input. Connects through internal R1 = 100kΩ (with R2 = 10kΩ feedback) to the A1 difference-amplifier inverting node; input differential/common-mode voltages up to ±100V are supported (voltage divider ratio 10:1). Input impedance to this pin is approximately 91.7kΩ differential. |+| 3 | VIN+ | input | Non-inverting differential signal input. Connects through internal R3 = 100kΩ to A1's non-inverting node (with R4 = 10kΩ to Ref); supports ±100V signal inputs. Differential input impedance approximately 110kΩ; common-mode impedance approximately 55kΩ. |+| 4 | V- | power_in | Negative supply rail. Accepts dual supplies of ±2.25V to ±18V (operating down to ±1.35V) or single-supply operation with V+ up to 36V above V-. Bypass with 0.1µF close to the pin. |+| 5 | RG | passive | Inverting input of the output buffer amplifier A2 and gain-set node. External resistors RG1 (to ground) and RG2 (to VO) set the overall gain G = 0.1 × (1 + RG2/RG1); RG2 = 10kΩ with RG1 open gives unity buffer gain (overall G = 0.1V/V). Design for approximately 10kΩ parallel resistance for proper bias current cancellation. |+| 6 | VO | output | Output of the amplifier chain (A2 output). Delivers ±15mA short-circuit current, stable with up to 1000pF load capacitance. Output swing is (V-)+0.15V to (V+)-1V at RL=100kΩ (G=1). |+| 7 | V+ | power_in | Positive supply rail. Accepts dual supplies of ±2.25V to ±18V or single supply 4.5V to 36V referenced to V-. Quiescent current is typically ±570µA. Bypass with 0.1µF close to the pin. |+| 8 | VO1 | output | Output of the first-stage difference amplifier A1, taken before the internal 10kΩ series resistor (R5) that drives A2's non-inverting input. Available for applications such as filtering (e.g. capacitor at VO1 forms an active filter with R5) or precision current-source configurations. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Op-amp/Cmp |+| Pins | 8 |++## Ordering variants++- `INA146UA`+- `INA146UA/2K5`+- `INA146UAE4`+- `INA146UA/2K5E4`++## CAD (KiCad official)++- Symbol: `INA146UA`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/ina146ua-datasheet.pdf) (None pp, sha256 `1bb150074f605160`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina146ua-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "ina146ua",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Differential OpAmps, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "op-amp-cmp",+ "ina146ua"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ina146ua.kicad_sym",+ "ina146ua.kicad_mod",+ "ina146ua.glb",+ "ina146ua.step",+ "ina146ua.lbr",+ "docs/hero.png",+ "docs/ina146ua-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}