← Commit history
ina137ua: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "INA137UA",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Special Purpose Amplifiers",+ "parts": {+ "symbol": "ina137ua.kicad_sym",+ "footprint": "ina137ua.kicad_mod",+ "model_3d": "ina137ua-etched.glb",+ "model_3d_plain": "ina137ua.glb",+ "model_3d_step": "ina137ua-etched.step",+ "model_3d_step_plain": "ina137ua.step",+ "lbr": "ina137ua.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "Ref",+ "type": "input",+ "description": "Reference terminal for the output. Normally grounded; a voltage applied here is summed with the output signal and can be used to null offset voltage. Source impedance should be less than 10Ω to maintain good common-mode rejection."+ },+ {+ "number": "2",+ "name": "-In",+ "type": "input",+ "description": "Inverting differential input. Connects through an internal 12kΩ input resistor to the op amp's inverting node with a 6kΩ feedback resistor. Source impedance must be closely matched to the +In pin to preserve common-mode rejection."+ },+ {+ "number": "3",+ "name": "+In",+ "type": "input",+ "description": "Non-inverting differential input. Connects through an internal 12kΩ input resistor to the op amp's non-inverting node with a 6kΩ resistor to Ref. Source impedance must be closely matched to the -In pin to preserve common-mode rejection."+ },+ {+ "number": "4",+ "name": "V-",+ "type": "power_in",+ "description": "Negative power supply. Operating range −4V to −18V (±4V to ±18V dual-supply, 8V to 36V total). Decoupling capacitors (e.g. 1µF) should be placed close to this pin."+ },+ {+ "number": "5",+ "name": "Sense",+ "type": "input",+ "description": "Sense terminal - feedback point from the output side of the internal 6kΩ feedback resistor. Normally connected to the Output pin; can be used remotely to close the feedback loop at the load or to reconfigure the gain (G=1/2 vs G=2)."+ },+ {+ "number": "6",+ "name": "Output",+ "type": "output",+ "description": "Op amp output. Delivers Vo = 1/2 (V+In − V−In) in the standard G=1/2 configuration. Output voltage swings to within ~1.8V of V+ and ~1.6V of V−; continuous short-circuit current limit ±60mA; stable driving up to 500pF capacitive load."+ },+ {+ "number": "7",+ "name": "V+",+ "type": "power_in",+ "description": "Positive power supply. Operating range +4V to +18V (±4V to ±18V dual-supply, 8V to 36V total). Decoupling capacitors (e.g. 1µF) should be placed close to this pin."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to a convenient net; no electrical function."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}