← Commit history

Initial commit: component/ina137ua

Ray ·0a7637e80b ·
2 files changed +89
README.mdadded+55
@@ -0,0 +1,55 @@+# INA137UA++**Texas Instruments** · Special Purpose Amplifiers · SOIC-8++INA137UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Ref | input | Reference terminal for the output. Normally grounded; a voltage applied here is summed with the output signal and can be used to null offset voltage. Source impedance should be less than 10Ω to maintain good common-mode rejection. |+| 2 | -In | input | Inverting differential input. Connects through an internal 12kΩ input resistor to the op amp's inverting node with a 6kΩ feedback resistor. Source impedance must be closely matched to the +In pin to preserve common-mode rejection. |+| 3 | +In | input | Non-inverting differential input. Connects through an internal 12kΩ input resistor to the op amp's non-inverting node with a 6kΩ resistor to Ref. Source impedance must be closely matched to the -In pin to preserve common-mode rejection. |+| 4 | V- | power_in | Negative power supply. Operating range −4V to −18V (±4V to ±18V dual-supply, 8V to 36V total). Decoupling capacitors (e.g. 1µF) should be placed close to this pin. |+| 5 | Sense | input | Sense terminal - feedback point from the output side of the internal 6kΩ feedback resistor. Normally connected to the Output pin; can be used remotely to close the feedback loop at the load or to reconfigure the gain (G=1/2 vs G=2). |+| 6 | Output | output | Op amp output. Delivers Vo = 1/2 (V+In − V−In) in the standard G=1/2 configuration. Output voltage swings to within ~1.8V of V+ and ~1.6V of V−; continuous short-circuit current limit ±60mA; stable driving up to 500pF capacitive load. |+| 7 | V+ | power_in | Positive power supply. Operating range +4V to +18V (±4V to ±18V dual-supply, 8V to 36V total). Decoupling capacitors (e.g. 1µF) should be placed close to this pin. |+| 8 | NC | unconnected | No internal connection. Leave floating or tie to a convenient net; no electrical function. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Op-amp/Cmp |+| Pins | 8 |++## Ordering variants++- `INA137UA`+- `INA137UA/2K5`+- `INA137UA/2K5G4`+- `INA137UAG4`+- `INA137UAPA`+- `INA137UAINA2137UA`+- `INA137UAINA2137UA/2K5`+- `INA137UAINA2137UAE4`+- `INA137UAINA2137PA`++## CAD (KiCad official)++- Symbol: `INA137UA`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/ina137ua-datasheet.pdf) (None pp, sha256 `c57f14b353cad19b`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina137ua-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ina137ua",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Special Purpose Amplifiers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "op-amp-cmp",+    "ina137ua"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina137ua.kicad_sym",+    "ina137ua.kicad_mod",+    "ina137ua.glb",+    "ina137ua.step",+    "ina137ua.lbr",+    "docs/hero.png",+    "docs/ina137ua-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file