← Commit history
ina131ap: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+93−13
package.json+51−11@@ -68,31 +68,31 @@ "number": "1", "name": "RG", "type": "passive",- "description": "Gain-setting resistor pin; an external RG between pins 1 and 8 raises gain above 100 per G = 100 + 250k\u03a9/RG (250k\u03a9 term accurate to \u00b140%), and it is left open for G = 100."+ "description": "Gain-setting resistor pin; an external RG between pins 1 and 8 raises gain above 100 per G = 100 + 250kΩ/RG (250kΩ term accurate to ±40%), and it is left open for G = 100." }, { "number": "2",- "name": "V\u2013IN",+ "name": "V–IN", "type": "power_in",- "description": "Inverting input, protected to \u00b140V even with no supply present, and it needs a bias current return path."+ "description": "Inverting input, protected to ±40V even with no supply present, and it needs a bias current return path." }, { "number": "3", "name": "V+IN", "type": "power_in",- "description": "Non-inverting input, protected to \u00b140V even with no supply present, and it needs a bias current return path."+ "description": "Non-inverting input, protected to ±40V even with no supply present, and it needs a bias current return path." }, { "number": "4",- "name": "V\u2013",+ "name": "V–", "type": "power_in",- "description": "Negative supply, rated for supply voltage up to \u00b118V (\u00b12.25V to \u00b118V operating), with a 0.1\u00b5F decoupling capacitor recommended."+ "description": "Negative supply, rated for supply voltage up to ±18V (±2.25V to ±18V operating), with a 0.1µF decoupling capacitor recommended." }, { "number": "5", "name": "Ref", "type": "input",- "description": "Output reference terminal, normally grounded, and it must be a low-impedance connection to preserve common-mode rejection (5\u03a9 in series degrades 110dB CMR to about 106dB)."+ "description": "Output reference terminal, normally grounded, and it must be a low-impedance connection to preserve common-mode rejection (5Ω in series degrades 110dB CMR to about 106dB)." }, { "number": "6",@@ -104,13 +104,13 @@ "number": "7", "name": "V+", "type": "power_in",- "description": "Positive supply, rated for supply voltage up to \u00b118V (\u00b12.25V to \u00b118V operating), with a 0.1\u00b5F decoupling capacitor recommended."+ "description": "Positive supply, rated for supply voltage up to ±18V (±2.25V to ±18V operating), with a 0.1µF decoupling capacitor recommended." }, { "number": "8", "name": "RG", "type": "passive",- "description": "Gain-setting resistor pin; an external RG between pins 8 and 1 raises gain above 100 per G = 100 + 250k\u03a9/RG, and it is left open for G = 100."+ "description": "Gain-setting resistor pin; an external RG between pins 8 and 1 raises gain above 100 per G = 100 + 250kΩ/RG, and it is left open for G = 100." } ], "provenance": {@@ -147,6 +147,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina131ap.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina131ap-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bf59f831e3545c93bd42f72acad35cc949ed21e63e5fdd5152412484e86f5186",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -132,7 +132,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina131ap.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina131ap-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bf59f831e3545c93bd42f72acad35cc949ed21e63e5fdd5152412484e86f5186",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -179,4 +219,4 @@ "visibility": { "public": true }-}+}