← Commit history

ina128pa: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·049bd6216e · ·parent 8b535a2
2 files changed +90−10
package.json+48−8
@@ -53,25 +53,25 @@         "number": "1",         "name": "RG",         "type": "passive",-        "description": "Gain setting resistor pin: connect external resistor between pins 1 and 8 to set gain according to G = 1 + 50k\u03a9/RG for INA128."+        "description": "Gain setting resistor pin: connect external resistor between pins 1 and 8 to set gain according to G = 1 + 50kΩ/RG for INA128."       },       {         "number": "2",         "name": "VIN-",         "type": "power_in",-        "description": "Negative input of differential input pair with common-mode input voltage range (V-) + 2V to (V+) - 2V and overvoltage protection to \u00b140V."+        "description": "Negative input of differential input pair with common-mode input voltage range (V-) + 2V to (V+) - 2V and overvoltage protection to ±40V."       },       {         "number": "3",         "name": "VIN+",         "type": "power_in",-        "description": "Positive input of differential input pair with common-mode input voltage range (V-) + 2V to (V+) - 2V and overvoltage protection to \u00b140V."+        "description": "Positive input of differential input pair with common-mode input voltage range (V-) + 2V to (V+) - 2V and overvoltage protection to ±40V."       },       {         "number": "4",         "name": "V-",         "type": "power_in",-        "description": "Negative power supply terminal with supply voltage range \u00b12.25V to \u00b118V between V+ and V-."+        "description": "Negative power supply terminal with supply voltage range ±2.25V to ±18V between V+ and V-."       },       {         "number": "5",@@ -89,13 +89,13 @@         "number": "7",         "name": "V+",         "type": "power_in",-        "description": "Positive power supply terminal with supply voltage range \u00b12.25V to \u00b118V between V+ and V-."+        "description": "Positive power supply terminal with supply voltage range ±2.25V to ±18V between V+ and V-."       },       {         "number": "8",         "name": "RG",         "type": "passive",-        "description": "Gain setting resistor pin: connect external resistor between pins 1 and 8 to set gain according to G = 1 + 50k\u03a9/RG for INA128."+        "description": "Gain setting resistor pin: connect external resistor between pins 1 and 8 to set gain according to G = 1 + 50kΩ/RG for INA128."       }     ],     "provenance": {@@ -130,6 +130,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ina128pa.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ina128pa-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9fedbf112b28f002983eff5fd2e0a563f1e8b1ef595b61d212e97470950121f0",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -115,7 +115,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ina128pa.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ina128pa-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "body on z = 0, through-hole leads below",+        "extents_mm": [+          7.874,+          9.27,+          6.98+        ],+        "zmin_mm": -3.3,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9fedbf112b28f002983eff5fd2e0a563f1e8b1ef595b61d212e97470950121f0",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -162,4 +202,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}