← Commit history
page.json+7−4@@ -32,19 +32,19 @@ "number": "1", "name": "ADJ", "type": "input",- "description": "Adjust pin for the adjustable IL1117C-AD variant. Connect to an external resistor divider between VOUT and GND to program the output voltage; internal reference is ~1.25 V. Adjust pin current ~56 \u00b5A typical (80 \u00b5A max). On fixed-voltage variants this same pin serves as GND."+ "description": "Adjust pin for the adjustable IL1117C-AD variant. Connect to an external resistor divider between VOUT and GND to program the output voltage; internal reference is ~1.25 V. Adjust pin current ~56 µA typical (80 µA max). On fixed-voltage variants this same pin serves as GND." }, { "number": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated output voltage, up to 1 A. Requires a minimum 10 \u00b5F tantalum output capacitor for transient response and stability. In the SOT-223 package pin 2 is fused to the tab/heat sink for thermal dissipation."+ "description": "Regulated output voltage, up to 1 A. Requires a minimum 10 µF tantalum output capacitor for transient response and stability. In the SOT-223 package pin 2 is fused to the tab/heat sink for thermal dissipation." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Unregulated input supply, absolute maximum 15 V. A 10 \u00b5F tantalum input capacitor is recommended when the regulator is located far from the supply filter. Must be at least VOUT + dropout (typ 1.2 V, max 1.4 V at 1 A, 25 \u00b0C)."+ "description": "Unregulated input supply, absolute maximum 15 V. A 10 µF tantalum input capacitor is recommended when the regulator is located far from the supply filter. Must be at least VOUT + dropout (typ 1.2 V, max 1.4 V at 1 A, 25 °C)." } ], "provenance": {@@ -108,5 +108,8 @@ "docs/il1117c-ad-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }