← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# ICM-45686++**TDK InvenSense** · Attitude Sensor/Gyroscope · LGA-14(3x2.5)++ICM-45686 from TDK InvenSense, in a LGA-14(3x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AP_SDO/AP_AD0 | bidirectional | AP SPI serial data output in 4-wire SPI mode; AP I3C/I2C slave address LSB when using I3C/I2C. Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active. |+| 2 | RESV/AUX1_SDIO/AUX1_SDI/MAS_DA | bidirectional | Multi-function: AUX1 SPI serial data I/O (3-wire) or SDI (4-wire) in Dual Interface OIS mode; I2C master data (MAS_DA) in Dual Interface I2C Master mode; RESV (no connect or tie to VDDIO/GND) in Single Interface mode. Configurable internal pull-up/pull-down (default pull-up enabled). |+| 3 | RESV/AUX1_SCLK/MAS_CLK | bidirectional | AUX1 SPI serial clock in Dual Interface OIS mode; I2C master clock (MAS_CLK) in Dual Interface I2C Master mode; RESV (no connect or tie to VDDIO/GND) in Single Interface mode. Configurable internal pull-up/pull-down (default pull-up enabled). |+| 4 | INT1/INT | output | Programmable interrupt 1 output; can be configured as push-pull or open-drain. All interrupts can be mapped to pin 4. Configurable internal pull-up/pull-down (default pull-up disabled). |+| 5 | VDDIO | power_in | Digital I/O supply voltage. Typical 1.71-3.6 V (1.1 V min when I3C interface is used). Decouple with 0.1 µF (C2) to GND per typical operating circuit. |+| 6 | GND | power_in | Power supply ground reference for both analog core (VDD) and digital I/O (VDDIO). |+| 7 | RESV | unconnected | Reserved. Leave as No Connect or tie to VDDIO or GND. Configurable internal pull-up/pull-down (default pull-up enabled); if left as NC, keep internal pull-up enabled; if tied to VDDIO/GND, disable internal pull-up. |+| 8 | VDD | power_in | Main analog/core power supply voltage. Typical 1.71-3.6 V. Decouple with 0.1 µF (C1) to GND per typical operating circuit. |+| 9 | INT2/FSYNC/CLKIN | bidirectional | Programmable interrupt 2 output (push-pull or open-drain); alternatively frame-sync input (FSYNC) or external clock input (CLKIN). If unused, leave NC or tie to VDDIO. Configurable internal pull-up/pull-down (default pull-up enabled). |+| 10 | RESV/AUX1_CS | input | AUX1 SPI chip-select input in Dual Interface OIS mode; RESV (no connect or tie to VDDIO/GND) in Single Interface or I2C Master modes. Configurable internal pull-up/pull-down (default pull-up enabled). |+| 11 | RESV/AUX1_SDO | output | AUX1 SPI serial data output in Dual Interface OIS 4-wire mode (leave NC if unused); RESV (no connect or tie to VDDIO/GND) in Single Interface or I2C Master modes. Configurable internal pull-up/pull-down (default pull-up enabled). |+| 12 | AP_CS | input | AP SPI chip-select input for the host SPI interface; tie to VDDIO if using AP I3C/I2C interface. Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active. |+| 13 | AP_SCL/AP_SCLK | input | AP host serial clock: I3C/I2C serial clock (AP_SCL) or SPI serial clock (AP_SCLK), up to 12.9 MHz I3C, 1 MHz I2C, or 24 MHz SPI. Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active. |+| 14 | AP_SDA/AP_SDIO/AP_SDI | bidirectional | AP host serial data: I3C/I2C serial data (AP_SDA), SPI serial data I/O (AP_SDIO, 3-wire mode), or SPI serial data input (AP_SDI, 4-wire mode). Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TDK InvenSense |+| Package | LGA-14(3x2.5) |+| Category | Sensor |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `ICM-45686`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(3x2.5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TDK InvenSense datasheet](docs/icm-45686-datasheet.pdf) (199 pp, sha256 `dbff9a161c741953`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/icm-45686-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "icm-45686",+ "version": "0.1.0",+ "type": "component",+ "description": "TDK InvenSense Attitude Sensor/Gyroscope, LGA-14(3x2.5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensor",+ "icm-45686"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "icm-45686.kicad_sym",+ "icm-45686.kicad_mod",+ "icm-45686.glb",+ "icm-45686.step",+ "icm-45686.lbr",+ "docs/hero.png",+ "docs/icm-45686-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}