component
ICM-42631
Public Made by Adomby adom
TDK InvenSense Accelerometers, LGA-14(2.5x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+152−8@@ -1,13 +1,162 @@ {+ "schema_version": 1,+ "type": "component", "slug": "icm-42631",+ "title": "ICM-42631",+ "brief": "TDK InvenSense Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "TDK InvenSense Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "sensor", "icm-42631" ],+ "component": {+ "mpn": "ICM-42631",+ "manufacturer": "TDK InvenSense",+ "package": "LGA-14(2.5x3)",+ "pin_count": 14,+ "category": "Sensor",+ "subcategory": "Accelerometers",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/01f1a12efe333b71350ad9221ae6b099.pdf",+ "parts": {+ "symbol": "icm-42631.kicad_sym",+ "footprint": "icm-42631.kicad_mod",+ "model_3d": "icm-42631.glb",+ "model_3d_step": "icm-42631.step",+ "lbr": "icm-42631.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "AP_SDO/AP_AD0",+ "type": "bidirectional",+ "description": "AP SPI serial data output (4-wire SPI mode) or I3C/I2C slave address LSB. Pull-up/pull-down disabled by default; configurable via PIN1_PU_EN / PIN1_PD_EN (register 0x0Eh in Bank 3)."+ },+ {+ "number": "2",+ "name": "AUX1_SDIO/AUX1_SDI",+ "type": "bidirectional",+ "description": "AUX1 SPI serial data I/O (3-wire mode) or AUX1 SPI serial data input (4-wire mode). In single-interface mode, connect to VDDIO or GND. Pull-up configurable via PIN2_PU_EN."+ },+ {+ "number": "3",+ "name": "AUX1_SCLK",+ "type": "input",+ "description": "AUX1 SPI serial clock. In single-interface mode, connect to VDDIO or GND. Pull-up configurable via PIN3_PU_EN."+ },+ {+ "number": "4",+ "name": "INT1/INT",+ "type": "output",+ "description": "Interrupt 1 output; can be configured as push-pull or open-drain. In single-interface mode INT maps all interrupts to pin 4. Pull-down configurable via PIN4_PD_EN."+ },+ {+ "number": "5",+ "name": "VDDIO",+ "type": "power_in",+ "description": "I/O power supply voltage, 1.71 V to 3.6 V DC. Requires a 10 nF X7R bypass capacitor (C3) to GND per typical operating circuit."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Power supply ground return."+ },+ {+ "number": "7",+ "name": "AUX2_CS/RESV",+ "type": "input",+ "description": "In triple-interface mode: AUX2 SPI chip select (active low). In single/dual-interface mode: RESV - must be connected to GND. Pull-up disabled by default in single/dual mode and enabled by default in triple mode."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Core analog supply voltage, 1.71 V to 3.6 V DC. Requires 0.1 \u00b5F (C1) and 2.2 \u00b5F (C2) X7R bypass capacitors to GND per typical operating circuit."+ },+ {+ "number": "9",+ "name": "INT2/FSYNC/AUX2_SDIO",+ "type": "bidirectional",+ "description": "In single/dual-interface mode: INT2 interrupt output (push-pull or open-drain), or FSYNC frame sync input (tie to GND if unused). In triple-interface mode: AUX2 SPI serial data I/O. PIN9_AUX2_PD_EN must be 0 when triple-interface mode is used."+ },+ {+ "number": "10",+ "name": "AUX1_CS/NC",+ "type": "input",+ "description": "AUX1 SPI chip select (active low) in dual- and triple-interface modes. Not connected in single-interface mode. Pull-up enabled by default in single-interface mode and disabled in dual/triple-interface mode; configurable via PIN10_PU_EN."+ },+ {+ "number": "11",+ "name": "AUX1_SDO/AUX2_SCLK",+ "type": "bidirectional",+ "description": "In dual-interface mode: AUX1 SPI serial data output (4-wire); NC when 3-wire is used for AUX1. In triple-interface mode: AUX2 SPI serial clock. In single-interface mode: connect to VDDIO or NC. Pull-up configurable via PIN11_PU_EN."+ },+ {+ "number": "12",+ "name": "AP_CS",+ "type": "input",+ "description": "AP SPI chip select (active low) when the host interface is SPI. Connect to VDDIO when using the I3C/I2C interface. Pull-up enabled by default; configurable via PIN12_PU_EN / PIN12_PD_EN."+ },+ {+ "number": "13",+ "name": "AP_SCL/AP_SCLK",+ "type": "input",+ "description": "AP I3C/I2C serial clock (AP_SCL) or AP SPI serial clock (AP_SCLK), selected by host interface mode. Supports 12.5 MHz I3C, 1 MHz I2C, and 24 MHz SPI. Pull-up/pull-down configurable via PIN13_PU_EN / PIN13_PD_EN."+ },+ {+ "number": "14",+ "name": "AP_SDA/AP_SDIO/AP_SDI",+ "type": "bidirectional",+ "description": "AP I3C/I2C serial data (AP_SDA), AP SPI serial data I/O (AP_SDIO, 3-wire), or AP SPI serial data input (AP_SDI, 4-wire), selected by host interface mode. Pull-up/pull-down configurable via PIN14_PU_EN / PIN14_PD_EN."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/01f1a12efe333b71350ad9221ae6b099.pdf",+ "pages": 134,+ "sha256": "3456fbe839202657",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "TDK InvenSense",+ "Package": "LGA-14(2.5x3)",+ "Category": "Sensor",+ "Pins": "14"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "icm-42631"+ ],+ "discovery_pitch": "ICM-42631 (TDK InvenSense) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +174,5 @@ "docs/icm-42631-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }