← Commit history

icl7660sibazt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·77082faf35 · ·parent 8fe9b69
2 files changed +90−10
package.json+48−8
@@ -53,13 +53,13 @@         "number": "1",         "name": "BOOST",         "type": "input",-        "description": "Frequency boost input; connect to V+ to increase oscillator frequency by \u221a3 to reduce output impedance and ripple with smaller capacitors, or leave floating for nominal 10kHz operation."+        "description": "Frequency boost input; connect to V+ to increase oscillator frequency by √3 to reduce output impedance and ripple with smaller capacitors, or leave floating for nominal 10kHz operation."       },       {         "number": "2",         "name": "CAP+",         "type": "passive",-        "description": "Pump capacitor positive terminal; connect positive terminal of external capacitor C1 (10\u00b5F to 100\u00b5F) for charge pump switching node."+        "description": "Pump capacitor positive terminal; connect positive terminal of external capacitor C1 (10µF to 100µF) for charge pump switching node."       },       {         "number": "3",@@ -77,25 +77,25 @@         "number": "5",         "name": "VOUT",         "type": "output",-        "description": "Voltage output; generates negative output voltage from -1.5V to -12V (inverse of V+ input) with output impedance of 60-100\u03a9 at 20mA load; requires external reservoir capacitor C2."+        "description": "Voltage output; generates negative output voltage from -1.5V to -12V (inverse of V+ input) with output impedance of 60-100Ω at 20mA load; requires external reservoir capacitor C2."       },       {         "number": "6",         "name": "LV",         "type": "input",-        "description": "Low voltage control input; tie to GND for V+ <3.5V to bypass internal regulator for improved low-voltage operation, or leave floating for V+ \u22653.5V to maintain latchup protection."+        "description": "Low voltage control input; tie to GND for V+ <3.5V to bypass internal regulator for improved low-voltage operation, or leave floating for V+ ≥3.5V to maintain latchup protection."       },       {         "number": "7",         "name": "OSC",         "type": "input",-        "description": "Oscillator control terminal; connect external capacitor to reduce oscillator frequency (100pF lowers from 10kHz to 1kHz), or apply external clock with 1k\u03a9 series resistor to override frequency."+        "description": "Oscillator control terminal; connect external capacitor to reduce oscillator frequency (100pF lowers from 10kHz to 1kHz), or apply external clock with 1kΩ series resistor to override frequency."       },       {         "number": "8",         "name": "V+",         "type": "power_in",-        "description": "Positive supply voltage input; accepts 1.5V to 12V with absolute maximum of 13V; provides power to charge pump with supply current 80-160\u00b5A typical at 25\u00b0C and 5V."+        "description": "Positive supply voltage input; accepts 1.5V to 12V with absolute maximum of 13V; provides power to charge pump with supply current 80-160µA typical at 25°C and 5V."       }     ],     "provenance": {@@ -130,6 +130,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "icl7660sibazt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "icl7660sibazt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1fffaefec767d827ee2d62436629fe88c3b361019abc9507b69d019af5aa0f50",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -115,7 +115,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "icl7660sibazt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "icl7660sibazt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1fffaefec767d827ee2d62436629fe88c3b361019abc9507b69d019af5aa0f50",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -163,4 +203,4 @@     "public": true   },   "updated_at": "2026-09-24T22:25:46.644Z"-}\ No newline at end of file+}