← Commit history
Publish 0.2.1
4 files changed
+432−11
icl7660m-hero.glbadded⋯ 1 unchanged line ⋯
icl7660m-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "ICL7660M",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "icl7660m-etched.glb",+ "glb_sha256": "9bc604e3195e4f8b50c81e781c1b3dff5c1ee3a7d203b72ed50f8c4540ab30fb",+ "footprint": "icl7660m.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "4f3e4bdd41de01c0ab9aead3d752a6f4f2974108e40e058257a985fbdde2f8c3"+ },+ "generator": "adom-wiki 1.8.30 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "N.C",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "CAP+",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "GND",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "CAP-",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "VOUT",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "LV",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "OSC",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "V+",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+162−4@@ -1,6 +1,6 @@ { "slug": "icl7660m",- "version": "0.2.0",+ "version": "0.2.1", "type": "component", "description": "HGSEMI DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -20,11 +20,169 @@ "icl7660m.kicad_mod", "icl7660m.glb", "icl7660m.step",+ "icl7660m-etched.step", "icl7660m.lbr", "docs/hero.png", "docs/icl7660m-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "pads.json"- ]-}+ "pads.json",+ "icl7660m-hero.glb",+ "icl7660m-hero.overlay.json"+ ],+ "component": {+ "mpn": "ICL7660M",+ "manufacturer": "HGSEMI",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c8c2c86cc08e14320b40f11c47e07e06.pdf",+ "parts": {+ "symbol": "icl7660m.kicad_sym",+ "footprint": "icl7660m.kicad_mod",+ "model_3d": "icl7660m-hero.glb",+ "model_3d_plain": "icl7660m.glb",+ "model_3d_step": "icl7660m-etched.step",+ "model_3d_step_plain": "icl7660m.step",+ "lbr": "icl7660m.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "N.C",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to ground; no functional role in the charge-pump operation."+ },+ {+ "number": "2",+ "name": "CAP+",+ "type": "passive",+ "description": "Positive terminal of the external flying (pump) capacitor C1 (typ. 10 µF). During the positive half-cycle, internal switches S1/S3 connect this pin to V+ to charge C1 up to V+."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / negative supply return. Also the 0 V reference against which V+ (input) and VOUT (negative output) are measured."+ },+ {+ "number": "4",+ "name": "CAP-",+ "type": "passive",+ "description": "Negative terminal of the external flying (pump) capacitor C1. During the negative half-cycle, internal switches S2/S4 connect this pin to VOUT so C1 transfers its charge into the reservoir capacitor at VOUT."+ },+ {+ "number": "5",+ "name": "VOUT",+ "type": "power_out",+ "description": "Negative-voltage output. Delivers VOUT = -(V+); requires an external 10 µF reservoir capacitor to GND. Absolute-max range: GND to VOUT ≤ 9 V; typical ROUT ≈ 55 Ω at V+ = 5 V, IL = 20 mA, fOSC = 5 kHz."+ },+ {+ "number": "6",+ "name": "LV",+ "type": "input",+ "description": "Low-voltage operation control input. Tie to GND when V+ ≤ 3.5 V to bypass the internal regulator and allow operation down to 1.5 V; leave floating (open) when V+ > 3.5 V. Max input current ILV = 20 µA."+ },+ {+ "number": "7",+ "name": "OSC",+ "type": "bidirectional",+ "description": "Oscillator pin. Internally driven at ~10 kHz (typ.) with COSC = 1 pF, V+ = 5 V; may be tied to an external capacitor to lower fOSC or driven from an external clock/oscillator to override the internal timing. Oscillator source impedance ROSC ≈ 100 kΩ at V+ = 5 V (≈ 1 MΩ at V+ = 2 V)."+ },+ {+ "number": "8",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply input, 1.5 V to 9 V (absolute-max V+ to GND = 9 V). Bypass to GND with a 10 µF capacitor. Typical quiescent current IV+ ≈ 65 µA at V+ = 5 V, no load, OSC/LV open."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/c8c2c86cc08e14320b40f11c47e07e06.pdf",+ "pages": 11,+ "sha256": "f07266afe8919114",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "pin1": {+ "pad": "1",+ "at": [+ -2.475,+ -1.905+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+ "mark": "drawn"+ },+ "models_3d": [+ {+ "file": "icl7660m.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "icl7660m-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "191d344de046c62ec7c2f6bc03702b142e03c8d59b4eab4c6f8bb1a1de47a2c0",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "ICL7660M",+ "brief": "HGSEMI DC-DC Converters, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "HGSEMI",+ "Package": "SOP-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "icl7660m"+ ],+ "discovery_pitch": "ICL7660M (HGSEMI) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "icl7660m", "title": "ICL7660M", "brief": "HGSEMI DC-DC Converters, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.2.0",+ "version": "0.2.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -190,11 +190,12 @@ "docs/hero.png", "docs/icl7660m-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json",+ "icl7660m-hero.glb",+ "icl7660m-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "ICL7660MM/TR",@@ -213,5 +214,7 @@ "kind": "packaging" } ],- "updated_at": "2026-09-24T22:25:38.153Z"-}+ "updated_at": "2026-09-24T22:25:38.153Z",+ "description": "HGSEMI DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}