← Commit history
page.json+7−4@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Precision enable input. Drive EN high (EN_HIGH \u2265 1.2 V) to turn the regulator on; pull low (EN_LOW \u2264 1.1 V) to shut down (IGND-SD \u2248 1.2 uA). Tie EN to IN for automatic startup. 100 mV logic hysteresis; ~80 us EN-to-VOUT delay."+ "description": "Precision enable input. Drive EN high (EN_HIGH ≥ 1.2 V) to turn the regulator on; pull low (EN_LOW ≤ 1.1 V) to shut down (IGND-SD ≈ 1.2 uA). Tie EN to IN for automatic startup. 100 mV logic hysteresis; ~80 us EN-to-VOUT delay." }, { "number": "4", "name": "ADJ", "type": "input",- "description": "Feedback/adjust input. On the ADJ (adjustable) version, connect to the tap of an external R1/R2 divider from OUT to GND to set VOUT = 1.2 V \u00d7 (1 + R1/R2). Recommended R2 \u2264 200 k\u03a9 to minimize error from the ~2 nA ADJ bias current. On fixed-output versions, ADJ is tied to the load (OUT sense)."+ "description": "Feedback/adjust input. On the ADJ (adjustable) version, connect to the tap of an external R1/R2 divider from OUT to GND to set VOUT = 1.2 V × (1 + R1/R2). Recommended R2 ≤ 200 kΩ to minimize error from the ~2 nA ADJ bias current. On fixed-output versions, ADJ is tied to the load (OUT sense)." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output, adjustable from 1.2 V up to VIN \u2212 VDROPOUT, 300 mA max. Bypass to GND with \u22652.2 uF low-ESR ceramic (ESR < 0.3 \u03a9, ESL < 2 nH). Dropout: 67 mV @ 50 mA, 203 mV @ 150 mA, 450 mV @ 300 mA. Current limit ~480 mA."+ "description": "Regulated output, adjustable from 1.2 V up to VIN − VDROPOUT, 300 mA max. Bypass to GND with ≥2.2 uF low-ESR ceramic (ESR < 0.3 Ω, ESL < 2 nH). Dropout: 67 mV @ 50 mA, 203 mV @ 150 mA, 450 mV @ 300 mA. Current limit ~480 mA." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/ibsp3032adjst5r00-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }