← Commit history

Initial commit: component/hx6610s

Ray ·6f2bf82ade ·
2 files changed +83
README.mdadded+49
@@ -0,0 +1,49 @@+# HX6610S++**HX hengjiaxing** · Battery Management · ESOP-8++HX6610S from HX hengjiaxing, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BAT | power_out | Battery positive terminal. Connects to the Li-ion cell's + terminal; delivers the trickle/CC/CV charge current from the internal PMOSFET. Float voltage is typically 4.22V (Vfloat range 4.18-4.26V). A 1uF bypass capacitor to GND should be placed close to this pin. |+| 2 | Vprog | input | Float-voltage programming pin. Left open (no R2) gives the default Vfloat = 4.22V. A resistor from Vprog to GND raises the float voltage (R = 2.20*265000/(Vprog-4.20)); a resistor from Vprog to BAT lowers it below 4.2V (R//265000 = (Vprog-2.2)*291500/2.2). Place R2 close to the pin to minimize Vfloat disturbance. |+| 3 | GND | power_in | Device ground / negative supply reference. All electrical parameters are referenced to this pin (0 V). |+| 4 | CT | input | Full-charge shutdown delay setting pin. A capacitor from CT to GND programs the delay before terminating charge / switching the indicator LED, per C = (1.5e-6 * T)/2.2 (e.g. 30 ms delay ≈ 20.5 nF). May be left unconnected when no delay/indicator transition is required. |+| 5 | Iprog | input | Charge-current programming pin (PROG). A 1% resistor from Iprog to GND sets the constant-current charge current per Ibat = 1200/R (e.g. 6 kΩ ⇒ 200 mA; max programmable ≈ 1 A). Pin voltage is ~0.1 V in trickle mode and ~1 V at full current. |+| 6 | CHRG | output | Open-drain charge-status indicator. Pulled low (LED on) while the chip is actively charging; high-impedance (LED off) when charging is complete, input is removed, or battery is shorted/reversed. Tie to VDD through an LED+resistor, or to GND if unused. |+| 7 | STDBY | output | Open-drain standby/full-charge indicator. Pulled low (LED on) when charging is finished or no battery is present; high-impedance while charging is in progress or under fault (short/reverse). Tie to VDD through an LED+resistor, or to GND if unused. |+| 8 | VDD | power_in | Positive supply input from USB or AC adapter. Operating range 4.5-6 V (absolute max 7 V); OVP trips at 6.2 V and charging stops. UVLO threshold ≈ 3.7 V (200 mV hysteresis). Place a 1 uF bypass capacitor to GND close to this pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HX hengjiaxing |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `HX6610S`+- `HX6610SHX6610D`++## CAD (KiCad official)++- Symbol: `HX6610S`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HX hengjiaxing datasheet](docs/hx6610s-datasheet.pdf) (None pp, sha256 `c0de7ee6e4ef9855`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hx6610s-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "hx6610s",+  "version": "0.1.0",+  "type": "component",+  "description": "HX hengjiaxing Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "hx6610s"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "hx6610s.kicad_sym",+    "hx6610s.kicad_mod",+    "hx6610s.glb",+    "hx6610s.step",+    "hx6610s.lbr",+    "docs/hero.png",+    "docs/hx6610s-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file