← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# HX24LC128BDRG++**HANSCHIP semiconductor** · EEPROM · SOP-8++HX24LC128BDRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | input | Device address input bit 0. Hardwire to VCC or GND to set one of the LSBs of the I2C slave address, allowing up to 4 (with A1) devices on the same bus. Internally biased low if left floating and board VCC-plane capacitive coupling is <3 pF; otherwise tie to GND. |+| 2 | A1 | input | Device address input bit 1. Hardwire to VCC or GND to select the device's I2C slave address. Internally biased low if left floating (with the <3 pF coupling caveat); otherwise tie to GND. |+| 3 | NC | unconnected | No connect. Leave unconnected. (Note: the block diagram references an A2 address input, but on the 8-pin package this position is documented as NC.) |+| 4 | GND | power_in | Ground reference for the device. |+| 5 | SDA | bidirectional | Serial data. Bidirectional, open-drain - requires an external pull-up resistor. Can be wire-ORed with other open-drain/open-collector devices on the two-wire bus. |+| 6 | SCL | input | Serial clock input. Positive edge clocks data into the EEPROM and negative edge clocks data out. Max 400 kHz at 1.8/2.7/3.3 V and 1 MHz at 5 V. |+| 7 | WP | input | Write protect input. Tied to GND allows normal read/write; tied to VCC inhibits all writes to the full memory array. Internally biased low if left floating (with the <3 pF coupling caveat); otherwise tie to GND. |+| 8 | VCC | power_in | Positive supply, 1.8 V to 5.5 V. ICC ≈ 0.4 mA (read) / 2.0 mA (write) at 5 V, 400 kHz; standby current ISB ≈ 3 µA at 5.5 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HANSCHIP semiconductor |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `HX24LC128BDRG`+- `HX24LC128BDRG4`+- `HX24LC128BDRGBPG`+- `HX24LC128BDRGBDGKRG`++## CAD (KiCad official)++- Symbol: `HX24LC128BDRG`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HANSCHIP semiconductor datasheet](docs/hx24lc128bdrg-datasheet.pdf) (None pp, sha256 `55acea65f891792d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hx24lc128bdrg-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hx24lc128bdrg",+ "version": "0.1.0",+ "type": "component",+ "description": "HANSCHIP semiconductor EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "hx24lc128bdrg"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hx24lc128bdrg.kicad_sym",+ "hx24lc128bdrg.kicad_mod",+ "hx24lc128bdrg.glb",+ "hx24lc128bdrg.step",+ "hx24lc128bdrg.lbr",+ "docs/hero.png",+ "docs/hx24lc128bdrg-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}