hx24c02p

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "HX24C02P",+    "manufacturer": "HX hengjiaxing",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "EEPROM",+    "parts": {+      "symbol": "hx24c02p.kicad_sym",+      "footprint": "hx24c02p.kicad_mod",+      "model_3d": "hx24c02p-etched.glb",+      "model_3d_plain": "hx24c02p.glb",+      "model_3d_step": "hx24c02p-etched.step",+      "model_3d_step_plain": "hx24c02p.step",+      "lbr": "hx24c02p.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "A0",+        "type": "input",+        "description": "Device address input bit 0. Tied high or low to set the least significant bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0). Allows up to 8 HX24C02 devices to share one I2C bus."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Device address input bit 1. Tied high or low to set the middle bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0)."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "Device address input bit 2. Tied high or low to set the most significant bit of the 3-bit hardware slave address (I2C address = 1010_A2A1A0)."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / negative supply return. Reference for all voltages."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial data line. Open-drain bidirectional data pin; requires an external pull-up resistor (typ. 10 kΩ) to VCC. Data on SDA may only change while SCL is low."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "I2C serial clock input. Driven by the bus master; requires an external pull-up resistor (typ. 10 kΩ) to VCC. Max frequency 1 MHz at VCC=5V (400 kHz at 1.8V)."+      },+      {+        "number": "7",+        "name": "WP",+        "type": "input",+        "description": "Write protect input. When tied high (VCC), write operations to the entire memory array are inhibited (hardware write protection); when tied low (GND), normal read/write operations are allowed."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage. Operating range 1.8V to 5.5V; absolute maximum 5.5V. Bypass with a 1 µF ceramic capacitor close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}