← Commit history

Initial commit: component/hx1364a-agn

Ray ·ef6792df7f ·
2 files changed +81
README.mdadded+47
@@ -0,0 +1,47 @@+# HX1364A-AGN++**HEXIN** · DC-DC Converters · SOP-8++HX1364A-AGN from HEXIN, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FB | input | Feedback pin. Receives the divided output voltage from an external resistor divider (R2/R3) and is compared against the internal 1.20V reference. VOUT = 1.20V x [1 + (R2/R3)]. Feedback input current is ~0.05uA. |+| 2 | ILIM | bidirectional | Programmable current limit pin. Sources ~8.5uA (7-10uA) that develops a voltage across an external RLIM resistor to GND, setting the low-side switch valley current limit (RLIM(kOhm) ~= 45 x Imax(A)). Leaving ILIM floating gives a default current limit of 1.5A. |+| 3 | EN | input | ON/OFF control input. Drive above 4.0V to enable the part; drive below 1.5V to shut down the device. Do not leave floating. Absolute maximum voltage is 6V. |+| 4 | VIN | power_in | Main input supply pin. Operating range 8V to 38V (absolute maximum 40V; input protection mode trigger at 32V). Must be decoupled to GND with a 100uF or greater ceramic capacitor located close to the pin. |+| 5 | SW | output | Switch node. Connects to the external inductor. High-frequency switching node between the internal P-channel and N-channel MOSFETs; keep trace area small. Pins 5 and 6 are tied internally and both must be connected to the inductor. |+| 6 | SW | output | Switch node. Connects to the external inductor. Second SW pin, internally tied to pin 5; both should be connected in parallel to reduce trace resistance. |+| 7 | GND | power_in | Ground return pin. Pins 7 and 8 are the device ground and should both be connected to the PCB ground plane; analog grounds should join at a common node and connect to power ground behind the output capacitors. |+| 8 | GND | power_in | Ground return pin. Second GND pin, internally tied to pin 7; both should be connected in parallel to the ground plane for reduced impedance and improved thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HEXIN |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `HX1364A-AGN`++## CAD (KiCad official)++- Symbol: `HX1364A-AGN`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HEXIN datasheet](docs/hx1364a-agn-datasheet.pdf) (9 pp, sha256 `7181b59e1d6d5e07`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hx1364a-agn-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "hx1364a-agn",+  "version": "0.1.0",+  "type": "component",+  "description": "HEXIN DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "hx1364a-agn"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "hx1364a-agn.kicad_sym",+    "hx1364a-agn.kicad_mod",+    "hx1364a-agn.glb",+    "hx1364a-agn.step",+    "hx1364a-agn.lbr",+    "docs/hero.png",+    "docs/hx1364a-agn-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file