← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "hx1364a-agn",+ "title": "HX1364A-AGN",+ "brief": "HEXIN DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "HEXIN DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "hx1364a-agn" ],+ "component": {+ "mpn": "HX1364A-AGN",+ "manufacturer": "HEXIN",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e94c660c0abe234a56d7cffd402e72d4.pdf",+ "parts": {+ "symbol": "hx1364a-agn.kicad_sym",+ "footprint": "hx1364a-agn.kicad_mod",+ "model_3d": "hx1364a-agn.glb",+ "model_3d_step": "hx1364a-agn.step",+ "lbr": "hx1364a-agn.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "FB",+ "type": "input",+ "description": "Feedback pin. Receives the divided output voltage from an external resistor divider (R2/R3) and is compared against the internal 1.20V reference. VOUT = 1.20V x [1 + (R2/R3)]. Feedback input current is ~0.05uA."+ },+ {+ "number": "2",+ "name": "ILIM",+ "type": "bidirectional",+ "description": "Programmable current limit pin. Sources ~8.5uA (7-10uA) that develops a voltage across an external RLIM resistor to GND, setting the low-side switch valley current limit (RLIM(kOhm) ~= 45 x Imax(A)). Leaving ILIM floating gives a default current limit of 1.5A."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "ON/OFF control input. Drive above 4.0V to enable the part; drive below 1.5V to shut down the device. Do not leave floating. Absolute maximum voltage is 6V."+ },+ {+ "number": "4",+ "name": "VIN",+ "type": "power_in",+ "description": "Main input supply pin. Operating range 8V to 38V (absolute maximum 40V; input protection mode trigger at 32V). Must be decoupled to GND with a 100uF or greater ceramic capacitor located close to the pin."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "output",+ "description": "Switch node. Connects to the external inductor. High-frequency switching node between the internal P-channel and N-channel MOSFETs; keep trace area small. Pins 5 and 6 are tied internally and both must be connected to the inductor."+ },+ {+ "number": "6",+ "name": "SW",+ "type": "output",+ "description": "Switch node. Connects to the external inductor. Second SW pin, internally tied to pin 5; both should be connected in parallel to reduce trace resistance."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin. Pins 7 and 8 are the device ground and should both be connected to the PCB ground plane; analog grounds should join at a common node and connect to power ground behind the output capacitors."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return pin. Second GND pin, internally tied to pin 7; both should be connected in parallel to the ground plane for reduced impedance and improved thermal dissipation."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/e94c660c0abe234a56d7cffd402e72d4.pdf",+ "pages": 9,+ "sha256": "7181b59e1d6d5e07",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "HEXIN",+ "Package": "SOP-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "hx1364a-agn"+ ],+ "discovery_pitch": "HX1364A-AGN (HEXIN) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/hx1364a-agn-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }