← Commit history

htm1650-td: factory component page (tier=lcsc)

Ray ·a2a6581b33 · ·parent 8055381
1 file changed +170−8
page.json+170−8
@@ -1,13 +1,180 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "htm1650-td",+  "title": "HTM1650-TD",+  "brief": "TDSEMIC LED Drivers, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "TDSEMIC LED Drivers, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "led drivers",     "htm1650-td"   ],+  "component": {+    "mpn": "HTM1650-TD",+    "manufacturer": "TDSEMIC",+    "package": "SOP-16",+    "pin_count": 16,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/022e62a4607e03a1308e1e7a63fda9c2.pdf",+    "parts": {+      "symbol": "htm1650-td.kicad_sym",+      "footprint": "htm1650-td.kicad_mod",+      "model_3d": "htm1650-td.glb",+      "model_3d_step": "htm1650-td.step",+      "lbr": "htm1650-td.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "DIG1",+        "type": "output",+        "description": "LED digit 1 drive output, active-low; also used as key-scan output, active-high. Digit drive sink capability greater than 150 mA."+      },+      {+        "number": "2",+        "name": "CLK",+        "type": "input",+        "description": "Serial clock input for the 2-wire (I2C-like) interface. Data is latched on the rising edge of CLK. Internal pull-up (~350 uA typical pull-up current)."+      },+      {+        "number": "3",+        "name": "DIO",+        "type": "bidirectional",+        "description": "Serial data input/output for the 2-wire interface. Open-drain with internal pull-up (~350 uA). Data changes only when CLK is low; ACK asserted by the chip on the 9th clock."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V) for logic and drivers."+      },+      {+        "number": "5",+        "name": "DIG2",+        "type": "output",+        "description": "LED digit 2 drive output, active-low; also used as key-scan output, active-high."+      },+      {+        "number": "6",+        "name": "DIG3",+        "type": "output",+        "description": "LED digit 3 drive output, active-low; also used as key-scan output, active-high."+      },+      {+        "number": "7",+        "name": "DIG4",+        "type": "output",+        "description": "LED digit 4 drive output, active-low; also used as key-scan output, active-high."+      },+      {+        "number": "8",+        "name": "A/KI1",+        "type": "bidirectional",+        "description": "LED segment A drive output (active-high, >25 mA) shared with key-scan input KI1 (active-high, internal pull-down ~50 uA)."+      },+      {+        "number": "9",+        "name": "B/KI2",+        "type": "bidirectional",+        "description": "LED segment B drive output (active-high) shared with key-scan input KI2 (active-high, internal pull-down)."+      },+      {+        "number": "10",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply, 3.0-5.5 V (typ. 5 V). Add a 104 (100 nF) decoupling capacitor to GND close to the pin (<2 cm recommended). Labeled VDD in the pin description table but marked VCC on the pinout diagram."+      },+      {+        "number": "11",+        "name": "C/KI3",+        "type": "bidirectional",+        "description": "LED segment C drive output (active-high) shared with key-scan input KI3 (active-high, internal pull-down)."+      },+      {+        "number": "12",+        "name": "D/KI4",+        "type": "bidirectional",+        "description": "LED segment D drive output (active-high) shared with key-scan input KI4 (active-high, internal pull-down)."+      },+      {+        "number": "13",+        "name": "E/KI5",+        "type": "bidirectional",+        "description": "LED segment E drive output (active-high) shared with key-scan input KI5 (active-high, internal pull-down)."+      },+      {+        "number": "14",+        "name": "F/KI6",+        "type": "bidirectional",+        "description": "LED segment F drive output (active-high) shared with key-scan input KI6 (active-high, internal pull-down)."+      },+      {+        "number": "15",+        "name": "G/KI7",+        "type": "bidirectional",+        "description": "LED segment G drive output (active-high) shared with key-scan input KI7 (active-high, internal pull-down)."+      },+      {+        "number": "16",+        "name": "DP/KP",+        "type": "bidirectional",+        "description": "LED decimal-point segment output; also used as keyboard-press flag output (KP has internal pull-up ~2 mA typ)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/022e62a4607e03a1308e1e7a63fda9c2.pdf",+        "pages": 10,+        "sha256": "2bc5c6d416f24d44",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "TDSEMIC",+      "Package": "SOP-16",+      "Category": "LED Drivers",+      "Pins": "16"+    }+  },+  "variants": [+    {+      "mpn": "HTM1650-TD",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "htm1650-td"+  ],+  "discovery_pitch": "HTM1650-TD (TDSEMIC) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +192,5 @@     "docs/htm1650-td-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file