← Commit history

ht8563armz: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·27caddc6ed · ·parent e37ea88
1 file changed +74−1
page.json+74−1
@@ -30,5 +30,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "HT8563ARMZ",+    "manufacturer": "HTCSEMI",+    "package": "MSOP-8",+    "pin_count": 8,+    "category": "Real-time Clocks (RTC)",+    "parts": {+      "symbol": "ht8563armz.kicad_sym",+      "footprint": "ht8563armz.kicad_mod",+      "model_3d": "ht8563armz-etched.glb",+      "model_3d_plain": "ht8563armz.glb",+      "model_3d_step": "ht8563armz-etched.step",+      "model_3d_step_plain": "ht8563armz.step",+      "lbr": "ht8563armz.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OSCI",+        "type": "input",+        "description": "Oscillator input pin for the external 32.768 kHz quartz resonator. Can also be driven directly from an external oscillator (leave OSCO open in that case). Internal load capacitance ~12 pF; recommended crystal RS <= 40 kOhm, CL = 8 nF (or 12.5 pF per dynamic table)."+      },+      {+        "number": "2",+        "name": "OSCO",+        "type": "output",+        "description": "Oscillator output pin for the 32.768 kHz quartz resonator. Left unconnected when the device is driven from an external oscillator on OSCI."+      },+      {+        "number": "3",+        "name": "INT",+        "type": "output",+        "description": "Active-low interrupt output, asserted on alarm match or timer countdown reaching zero (per Control Register 2 configuration). Open-drain-style output; requires an external pull-up. IOL = 1 mA at VOL = 0.4 V, VDD = 5 V."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground / common return pin (0 V reference)."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial data line, bidirectional. Open-drain output; external pull-up resistor to VDD required. Compatible with 400 kHz Fast-mode I2C; input high >= 0.7*VDD, input low <= 0.3*VDD."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "I2C serial clock input from master, used to synchronize serial data transfer. Cycle frequency 0-400 kHz. VIH >= 0.7*VDD, VIL <= 0.3*VDD."+      },+      {+        "number": "7",+        "name": "CLKOUT",+        "type": "output",+        "description": "Programmable frequency divider (orthogonal signal) output. Selectable 32.768 kHz / 8.192 kHz / 4.096 kHz / 1 Hz via FD0/FD1; enabled by FE bit. Open-drain output requiring an external pull-up resistor. IOL/IOH = 1 mA at VDD = 5 V."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply voltage input. Operating range 1.0-5.5 V (I2C access guaranteed for VDD >= 1.8 V). Absolute maximum -0.5 V to +6.5 V. Typical IDD = 800 uA at 400 kHz I2C active; ~0.45 uA in non-active mode at 2 V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}