← Commit history

Initial commit: component/ht24c256arz

Ray ·e88af0c4b1 ·
2 files changed +85
README.mdadded+51
@@ -0,0 +1,51 @@+# HT24C256ARZ++**HTCSEMI** · EEPROM · SOP-8++HT24C256ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | input | Device address input bit 0. Hard-wired to VSS or VCC to set the least significant bit of the I2C slave address; if left floating it is internally read as VSS (low). Up to eight HT24C256A devices can share one 2-wire bus by using unique A0/A1/A2 combinations. |+| 2 | A1 | input | Device address input bit 1. Hard-wired to VSS or VCC to set the second I2C slave address bit; if left floating it is internally read as VSS (low). |+| 3 | A2 | input | Device address input bit 2. Hard-wired to VSS or VCC to set the most significant of the three slave address bits; if left floating it is internally read as VSS (low). |+| 4 | VSS | power_in | Negative power supply / ground reference (0V). |+| 5 | SDA | bidirectional | Serial data input/output for the 2-wire (I2C) interface. Open-drain output that requires an external pull-up resistor to VCC; may be wired-OR with other open-drain devices on the bus. Input high VIH = 0.7*VCC min, input low VIL = 0.3*VCC max; VOL = 0.4V max at IOL = 2.1mA (VCC = 2.4V). |+| 6 | SCL | input | Serial clock input for the 2-wire (I2C) interface. Data is clocked into the EEPROM on the positive edge and clocked out on the negative edge. Maximum clock frequency is 400kHz at VCC = 1.8V-5.0V and 1MHz at VCC = 2.5V-5.0V. |+| 7 | WP | input | Write protect input. When tied to VCC, the entire 256K memory array is write-protected (read-only). When tied to VSS or left floating, normal read/write operations are permitted. |+| 8 | VCC | power_in | Positive power supply, 1.8V to 5.5V over the -40°C to +85°C operating range. Operating current is 2mA max (read) / 5mA max (write) at 5V, 400kHz; standby current is 3μA max at 5V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HTCSEMI |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `HT24C256ARZ`+- `HT24C256ARZHT24C256ANZ`+- `HT24C256ARZHT24C256ARTZ`+- `HT24C256ARZHT24C256ARMZ`+- `HT24C256ARZHT24C256ARDZ`++## CAD (KiCad official)++- Symbol: `HT24C256ARZ`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HTCSEMI datasheet](docs/ht24c256arz-datasheet.pdf) (None pp, sha256 `ff05e910121cb10d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ht24c256arz-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ht24c256arz",+  "version": "0.1.0",+  "type": "component",+  "description": "HTCSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "ht24c256arz"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ht24c256arz.kicad_sym",+    "ht24c256arz.kicad_mod",+    "ht24c256arz.glb",+    "ht24c256arz.step",+    "ht24c256arz.lbr",+    "docs/hero.png",+    "docs/ht24c256arz-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file