← Commit history

Initial commit: component/ht1621

Ray ·82f1f27b08 ·
2 files changed +468
README.mdadded+85
@@ -0,0 +1,85 @@+# HT1621++**MSKSEMI** · LCD Drivers · LQFP-48(7x7)++HT1621 from MSKSEMI, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SEG7 | output | LCD segment 7 driver output for 32×4 LCD display matrix. |+| 2 | SEG6 | output | LCD segment 6 driver output for 32×4 LCD display matrix. |+| 3 | SEG5 | output | LCD segment 5 driver output for 32×4 LCD display matrix. |+| 4 | SEG4 | output | LCD segment 4 driver output for 32×4 LCD display matrix. |+| 5 | SEG3 | output | LCD segment 3 driver output for 32×4 LCD display matrix. |+| 6 | SEG2 | output | LCD segment 2 driver output for 32×4 LCD display matrix. |+| 7 | SEG1 | output | LCD segment 1 driver output for 32×4 LCD display matrix. |+| 8 | SEG0 | output | LCD segment 0 driver output for 32×4 LCD display matrix. |+| 9 | CS | input | Chip select input with internal pull-up; active low enables serial interface for data and command transfer, high level resets interface. |+| 10 | RD | input | READ clock input with internal pull-up; RAM data is output to DATA line on falling edge. |+| 11 | WR | input | WRITE clock input with internal pull-up; data on DATA line is latched on rising edge. |+| 12 | DATA | bidirectional | Serial data input/output with internal pull-up for 3-wire interface communication. |+| 13 | VSS | power_in | Ground reference, negative power supply connection. |+| 14 | OSCO | output | Oscillator output; connect to OSCI for 32.768kHz crystal operation or leave open for internal RC oscillator. |+| 15 | OSCI | input | Oscillator input; connect 32.768kHz crystal or 256kHz external clock, or leave open with OSCO for internal 256kHz RC oscillator. |+| 16 | VLCD | input | LCD voltage input for bias control. |+| 17 | VDD | power_in | Positive power supply input, operating range 2.4V to 5.2V. |+| 18 | IRQ | tri_state | Time base or WDT overflow flag output, N-channel open-drain type for interrupt signaling to host controller. |+| 19 | BZ | output | Buzzer output driver at 2kHz or 4kHz frequency, phase A of complementary output pair. |+| 20 | BZN | output | Inverted buzzer output driver, phase B complementary to BZ for driving piezoelectric buzzer. |+| 21 | COM0 | output | LCD common 0 output for up to 4-MUX LCD display drive. |+| 22 | COM1 | output | LCD common 1 output for up to 4-MUX LCD display drive. |+| 23 | COM2 | output | LCD common 2 output for up to 4-MUX LCD display drive. |+| 24 | COM3 | output | LCD common 3 output for up to 4-MUX LCD display drive. |+| 25 | SEG31 | output | LCD segment 31 driver output for 32×4 LCD display matrix. |+| 26 | SEG30 | output | LCD segment 30 driver output for 32×4 LCD display matrix. |+| 27 | SEG29 | output | LCD segment 29 driver output for 32×4 LCD display matrix. |+| 28 | SEG28 | output | LCD segment 28 driver output for 32×4 LCD display matrix. |+| 29 | SEG27 | output | LCD segment 27 driver output for 32×4 LCD display matrix. |+| 30 | SEG26 | output | LCD segment 26 driver output for 32×4 LCD display matrix. |+| 31 | SEG25 | output | LCD segment 25 driver output for 32×4 LCD display matrix. |+| 32 | SEG24 | output | LCD segment 24 driver output for 32×4 LCD display matrix. |+| 33 | SEG23 | output | LCD segment 23 driver output for 32×4 LCD display matrix. |+| 34 | SEG22 | output | LCD segment 22 driver output for 32×4 LCD display matrix. |+| 35 | SEG21 | output | LCD segment 21 driver output for 32×4 LCD display matrix. |+| 36 | SEG20 | output | LCD segment 20 driver output for 32×4 LCD display matrix. |+| 37 | SEG19 | output | LCD segment 19 driver output for 32×4 LCD display matrix. |+| 38 | SEG18 | output | LCD segment 18 driver output for 32×4 LCD display matrix. |+| 39 | SEG17 | output | LCD segment 17 driver output for 32×4 LCD display matrix. |+| 40 | SEG16 | output | LCD segment 16 driver output for 32×4 LCD display matrix. |+| 41 | SEG15 | output | LCD segment 15 driver output for 32×4 LCD display matrix. |+| 42 | SEG14 | output | LCD segment 14 driver output for 32×4 LCD display matrix. |+| 43 | SEG13 | output | LCD segment 13 driver output for 32×4 LCD display matrix. |+| 44 | SEG12 | output | LCD segment 12 driver output for 32×4 LCD display matrix. |+| 45 | SEG11 | output | LCD segment 11 driver output for 32×4 LCD display matrix. |+| 46 | SEG10 | output | LCD segment 10 driver output for 32×4 LCD display matrix. |+| 47 | SEG9 | output | LCD segment 9 driver output for 32×4 LCD display matrix. |+| 48 | SEG8 | output | LCD segment 8 driver output for 32×4 LCD display matrix. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MSKSEMI |+| Package | LQFP-48(7x7) |+| Category | LED Drivers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `HT1621`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `ht1621-etched.step` / `ht1621-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht1621.step` / `ht1621.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MSKSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922729917140992) (18 pp, sha256 `d01782c3b9399775`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ht1621-datasheet.pdf)
page.jsonadded+383
@@ -0,0 +1,383 @@+{+  "slug": "ht1621",+  "version": "0.1.0",+  "type": "component",+  "description": "MSKSEMI LCD Drivers, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "ht1621",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ht1621.kicad_sym",+    "ht1621.kicad_mod",+    "ht1621.glb",+    "ht1621.step",+    "ht1621.lbr",+    "docs/hero.png",+    "docs/ht1621-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "HT1621",+    "manufacturer": "MSKSEMI",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "LED Drivers",+    "subcategory": "LCD Drivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922729917140992",+    "parts": {+      "symbol": "ht1621.kicad_sym",+      "footprint": "ht1621.kicad_mod",+      "model_3d": "ht1621-etched.glb",+      "model_3d_plain": "ht1621.glb",+      "model_3d_step": "ht1621-etched.step",+      "model_3d_step_plain": "ht1621.step",+      "lbr": "ht1621.lbr"+    },+    "distributor_links": {+      "lcsc": "C20627218"+    },+    "pins": [+      {+        "number": "1",+        "name": "SEG7",+        "type": "output",+        "description": "LCD segment 7 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "2",+        "name": "SEG6",+        "type": "output",+        "description": "LCD segment 6 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "3",+        "name": "SEG5",+        "type": "output",+        "description": "LCD segment 5 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "4",+        "name": "SEG4",+        "type": "output",+        "description": "LCD segment 4 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "5",+        "name": "SEG3",+        "type": "output",+        "description": "LCD segment 3 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "6",+        "name": "SEG2",+        "type": "output",+        "description": "LCD segment 2 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "7",+        "name": "SEG1",+        "type": "output",+        "description": "LCD segment 1 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "8",+        "name": "SEG0",+        "type": "output",+        "description": "LCD segment 0 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "9",+        "name": "CS",+        "type": "input",+        "description": "Chip select input with internal pull-up; active low enables serial interface for data and command transfer, high level resets interface."+      },+      {+        "number": "10",+        "name": "RD",+        "type": "input",+        "description": "READ clock input with internal pull-up; RAM data is output to DATA line on falling edge."+      },+      {+        "number": "11",+        "name": "WR",+        "type": "input",+        "description": "WRITE clock input with internal pull-up; data on DATA line is latched on rising edge."+      },+      {+        "number": "12",+        "name": "DATA",+        "type": "bidirectional",+        "description": "Serial data input/output with internal pull-up for 3-wire interface communication."+      },+      {+        "number": "13",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference, negative power supply connection."+      },+      {+        "number": "14",+        "name": "OSCO",+        "type": "output",+        "description": "Oscillator output; connect to OSCI for 32.768kHz crystal operation or leave open for internal RC oscillator."+      },+      {+        "number": "15",+        "name": "OSCI",+        "type": "input",+        "description": "Oscillator input; connect 32.768kHz crystal or 256kHz external clock, or leave open with OSCO for internal 256kHz RC oscillator."+      },+      {+        "number": "16",+        "name": "VLCD",+        "type": "input",+        "description": "LCD voltage input for bias control."+      },+      {+        "number": "17",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive power supply input, operating range 2.4V to 5.2V."+      },+      {+        "number": "18",+        "name": "IRQ",+        "type": "tri_state",+        "description": "Time base or WDT overflow flag output, N-channel open-drain type for interrupt signaling to host controller."+      },+      {+        "number": "19",+        "name": "BZ",+        "type": "output",+        "description": "Buzzer output driver at 2kHz or 4kHz frequency, phase A of complementary output pair."+      },+      {+        "number": "20",+        "name": "BZN",+        "type": "output",+        "description": "Inverted buzzer output driver, phase B complementary to BZ for driving piezoelectric buzzer."+      },+      {+        "number": "21",+        "name": "COM0",+        "type": "output",+        "description": "LCD common 0 output for up to 4-MUX LCD display drive."+      },+      {+        "number": "22",+        "name": "COM1",+        "type": "output",+        "description": "LCD common 1 output for up to 4-MUX LCD display drive."+      },+      {+        "number": "23",+        "name": "COM2",+        "type": "output",+        "description": "LCD common 2 output for up to 4-MUX LCD display drive."+      },+      {+        "number": "24",+        "name": "COM3",+        "type": "output",+        "description": "LCD common 3 output for up to 4-MUX LCD display drive."+      },+      {+        "number": "25",+        "name": "SEG31",+        "type": "output",+        "description": "LCD segment 31 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "26",+        "name": "SEG30",+        "type": "output",+        "description": "LCD segment 30 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "27",+        "name": "SEG29",+        "type": "output",+        "description": "LCD segment 29 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "28",+        "name": "SEG28",+        "type": "output",+        "description": "LCD segment 28 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "29",+        "name": "SEG27",+        "type": "output",+        "description": "LCD segment 27 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "30",+        "name": "SEG26",+        "type": "output",+        "description": "LCD segment 26 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "31",+        "name": "SEG25",+        "type": "output",+        "description": "LCD segment 25 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "32",+        "name": "SEG24",+        "type": "output",+        "description": "LCD segment 24 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "33",+        "name": "SEG23",+        "type": "output",+        "description": "LCD segment 23 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "34",+        "name": "SEG22",+        "type": "output",+        "description": "LCD segment 22 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "35",+        "name": "SEG21",+        "type": "output",+        "description": "LCD segment 21 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "36",+        "name": "SEG20",+        "type": "output",+        "description": "LCD segment 20 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "37",+        "name": "SEG19",+        "type": "output",+        "description": "LCD segment 19 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "38",+        "name": "SEG18",+        "type": "output",+        "description": "LCD segment 18 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "39",+        "name": "SEG17",+        "type": "output",+        "description": "LCD segment 17 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "40",+        "name": "SEG16",+        "type": "output",+        "description": "LCD segment 16 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "41",+        "name": "SEG15",+        "type": "output",+        "description": "LCD segment 15 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "42",+        "name": "SEG14",+        "type": "output",+        "description": "LCD segment 14 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "43",+        "name": "SEG13",+        "type": "output",+        "description": "LCD segment 13 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "44",+        "name": "SEG12",+        "type": "output",+        "description": "LCD segment 12 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "45",+        "name": "SEG11",+        "type": "output",+        "description": "LCD segment 11 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "46",+        "name": "SEG10",+        "type": "output",+        "description": "LCD segment 10 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "47",+        "name": "SEG9",+        "type": "output",+        "description": "LCD segment 9 driver output for 32×4 LCD display matrix."+      },+      {+        "number": "48",+        "name": "SEG8",+        "type": "output",+        "description": "LCD segment 8 driver output for 32×4 LCD display matrix."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "28/48 pins cited to the wrong page (name found elsewhere): ['2:SEG6@p3', '3:SEG5@p3', '4:SEG4@p3', '20:BZN@p3']"+        ],+        "pages_sent": 18,+        "cost_usd": 0.3807,+        "at": "2026-09-22T03:01:30"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590922729917140992",+        "pages": 18,+        "sha256": "d01782c3b9399775",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file