← Commit history

ht1307arz: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·d21058c9a6 · ·parent 7c06c35
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "HT1307ARZ",+    "manufacturer": "HTCSEMI",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Real-time Clocks (RTC)",+    "parts": {+      "symbol": "ht1307arz.kicad_sym",+      "footprint": "ht1307arz.kicad_mod",+      "model_3d": "ht1307arz-etched.glb",+      "model_3d_plain": "ht1307arz.glb",+      "model_3d_step": "ht1307arz-etched.step",+      "model_3d_step_plain": "ht1307arz.step",+      "lbr": "ht1307arz.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "X1",+        "type": "input",+        "description": "Connection to one terminal of the external 32.768 kHz quartz crystal used by the on-chip oscillator. Recommended crystal load capacitance CLX = 12.5 pF."+      },+      {+        "number": "2",+        "name": "X2",+        "type": "output",+        "description": "Connection to the second terminal of the external 32.768 kHz quartz crystal for the on-chip oscillator. Recommended crystal load capacitance CLX = 12.5 pF."+      },+      {+        "number": "3",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup battery supply input, 2.0-3.5 V (absolute max -0.5 to 7.0 V). Sustains timekeeping and RAM when VCC is removed; typical IBAT is 0.5 uA (SQW off) or 0.8 uA (SQW on, 32 kHz on) at VBAT = 3 V."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. All voltages are referenced to this pin."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data I/O for the two-wire (I2C-compatible) bus. Open-drain output requires an external pull-up resistor to VCC. VOL <= 0.4 V at 5 mA sink; total bus capacitance up to 400 pF; supports standard-mode transfers at 100 kHz."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input for the two-wire (I2C-compatible) bus. Requires an external pull-up to VCC; input leakage ILI <= 1 uA. Maximum SCL frequency 100 kHz (standard mode)."+      },+      {+        "number": "7",+        "name": "SQW/OUT",+        "type": "output",+        "description": "Programmable square-wave / general-purpose output. When SQWE (control register bit 4) = 1, outputs 1 Hz, 4.096 kHz, 8.192 kHz, or 32.768 kHz selected by RS1:RS0. When SQWE = 0, the pin is driven to the level of the OUT bit. Open-drain: requires an external pull-up resistor."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Primary supply, 4.5-5.5 V (absolute max -0.5 to 7.0 V). When VCC > VBAT + 0.2 V the device operates from VCC; when VCC falls below 1.25 x VBAT the device inhibits access and switches to VBAT. Typical ICC 200 uA static / 1500 uA max during I2C traffic at 100 kHz."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}