← Commit history
page.json+252−8@@ -1,13 +1,262 @@ {+ "schema_version": 1,+ "type": "component", "slug": "hr8825",+ "title": "HR8825",+ "brief": "Jiaxing Heroic Elec Tech Stepper Motor Driver, HTSSOP-28-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Jiaxing Heroic Elec Tech Stepper Motor Driver, HTSSOP-28-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "motor driver ics", "hr8825" ],+ "component": {+ "mpn": "HR8825",+ "manufacturer": "Jiaxing Heroic Elec Tech",+ "package": "HTSSOP-28-EP",+ "pin_count": 29,+ "category": "Motor Driver ICs",+ "subcategory": "Stepper Motor Driver",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756930561422442496",+ "parts": {+ "symbol": "hr8825.kicad_sym",+ "footprint": "hr8825.kicad_mod",+ "model_3d": "hr8825.glb",+ "model_3d_step": "hr8825.step",+ "lbr": "hr8825.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "CP1",+ "type": "passive",+ "description": "Charge pump flying capacitor terminal 1. Connect a 0.1uF capacitor between CP1 and CP2 to build the high-side gate drive charge pump."+ },+ {+ "number": "2",+ "name": "CP2",+ "type": "passive",+ "description": "Charge pump flying capacitor terminal 2. Pairs with CP1 via a 0.1uF capacitor for internal charge pump generation."+ },+ {+ "number": "3",+ "name": "VCP",+ "type": "power_out",+ "description": "Charge pump reservoir / high-side gate drive supply. Connect a 0.1uF capacitor from VCP to VM."+ },+ {+ "number": "4",+ "name": "VMA",+ "type": "power_in",+ "description": "A-bridge motor supply, 8V to 32V. All VM pins must be tied together and bypassed to GND (\u2265100uF bulk plus 0.1uF ceramic close to pin)."+ },+ {+ "number": "5",+ "name": "AOUT1",+ "type": "output",+ "description": "A-bridge H-bridge output 1. Connects to one terminal of the stepper motor A-phase coil. Rated \u00b12.5A (positive current is defined as AOUT1 \u2192 AOUT2)."+ },+ {+ "number": "6",+ "name": "ISENA",+ "type": "passive",+ "description": "A-bridge current-sense return. Connect the A-bridge sense resistor Rs from ISENA to GND; VTRIP is regulated to VAVREF/5."+ },+ {+ "number": "7",+ "name": "AOUT2",+ "type": "output",+ "description": "A-bridge H-bridge output 2. Connects to the other terminal of the stepper motor A-phase coil."+ },+ {+ "number": "8",+ "name": "BOUT2",+ "type": "output",+ "description": "B-bridge H-bridge output 2. Connects to one terminal of the stepper motor B-phase coil. Positive current direction is BOUT1 \u2192 BOUT2."+ },+ {+ "number": "9",+ "name": "ISENB",+ "type": "passive",+ "description": "B-bridge current-sense return. Connect the B-bridge sense resistor Rs from ISENB to GND."+ },+ {+ "number": "10",+ "name": "BOUT1",+ "type": "output",+ "description": "B-bridge H-bridge output 1. Connects to the other terminal of the stepper motor B-phase coil."+ },+ {+ "number": "11",+ "name": "VMB",+ "type": "power_in",+ "description": "B-bridge motor supply, 8V to 32V. Must be tied to VMA - all VM pins connect to the same supply."+ },+ {+ "number": "12",+ "name": "AVREF",+ "type": "input",+ "description": "A-bridge current-set reference input, 1V to 3.5V (VREF absolute max -0.3 to 4V). Chopping current ICHOP = VAVREF / (5\u00b7Rs). Typically tied to BVREF and to V3P3OUT via a divider with 0.1uF bypass."+ },+ {+ "number": "13",+ "name": "BVREF",+ "type": "input",+ "description": "B-bridge current-set reference input, 1V to 3.5V. Usually tied to AVREF so both bridges share the same reference."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground. All GND pins and the exposed thermal pad must be tied to the PCB ground plane."+ },+ {+ "number": "15",+ "name": "V3P3OUT",+ "type": "power_out",+ "description": "Internal 3.3V LDO output (3.1V min / 3.5V max, up to 1mA load). Bypass with 0.1uF to GND; may be used to bias VREF and pull-ups."+ },+ {+ "number": "16",+ "name": "nRESET",+ "type": "input",+ "description": "Active-low reset input. Low resets internal logic and sets the microstep indexer to HOME while disabling H-bridges; STEP inputs are ignored. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "17",+ "name": "nSLEEP",+ "type": "input",+ "description": "Active-low sleep input. Low enters low-power sleep (H-bridges, charge pump and V3P3OUT disabled). On rising edge wait tWAKE \u2248 1ms before applying STEP. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "18",+ "name": "nFAULT",+ "type": "output",+ "description": "Open-drain fault output. Pulled low on overcurrent (OCP) or thermal shutdown (TSD). Requires external pull-up (e.g. 10k\u03a9 to V3P3OUT). VOL = 0.35V typ at 5mA."+ },+ {+ "number": "19",+ "name": "DECAY",+ "type": "input",+ "description": "Decay-mode select. Tied low = slow-rise mixed-decay fall (~25us); left floating or high = full mixed decay. External pull-down resistor (22k-100k) trims decay time. Internal 22k\u03a9 pull-down."+ },+ {+ "number": "20",+ "name": "DIR",+ "type": "input",+ "description": "Direction control input. Sets the direction advanced by the internal microstep indexer on each STEP rising edge. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "21",+ "name": "nENBL",+ "type": "input",+ "description": "Active-low output enable. Low enables the H-bridge outputs; high tri-states the outputs while the indexer continues to track STEP. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "22",+ "name": "STEP",+ "type": "input",+ "description": "Step clock input. Rising edge advances the microstep indexer by one step. fSTEP up to 250kHz; tWH/tWL \u2265 1.9us. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "23",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating (no defined function)."+ },+ {+ "number": "24",+ "name": "MODE0",+ "type": "input",+ "description": "Microstep resolution select bit 0. MODE[2:0] selects full/1/2/1/4/1/8/1/16/1/32-step operation per Table 1. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "25",+ "name": "MODE1",+ "type": "input",+ "description": "Microstep resolution select bit 1. See MODE0. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "26",+ "name": "MODE2",+ "type": "input",+ "description": "Microstep resolution select bit 2 (MSB). See MODE0. Internal 100k\u03a9 pull-down."+ },+ {+ "number": "27",+ "name": "nHOME",+ "type": "output",+ "description": "Open-drain HOME status output. Asserted low when the internal microstep indexer is at HOME position. Requires external pull-up."+ },+ {+ "number": "28",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground (second GND pin). Must be tied together with pin 14 GND and the exposed thermal pad (PPAD)."+ },+ {+ "number": "PPAD",+ "name": "GND",+ "type": "power_in",+ "description": "Exposed thermal pad on the underside of the ETSSOP-28 package. Must be soldered to the ground plane for both electrical and thermal performance."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756930561422442496",+ "pages": 19,+ "sha256": "91d3f5799f038978",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 29,+ "described": 29,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Jiaxing Heroic Elec Tech",+ "Package": "HTSSOP-28-EP",+ "Category": "Motor Driver ICs",+ "Pins": "29"+ }+ },+ "variants": [+ {+ "mpn": "HR8825MTER",+ "kind": "packaging"+ },+ {+ "mpn": "HR8825MTERA",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "hr8825"+ ],+ "discovery_pitch": "HR8825 (Jiaxing Heroic Elec Tech) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +274,5 @@ "docs/hr8825-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }