← Commit history
README.md+48−10
@@ -2,16 +2,15 @@  **Analog Devices** · RF Amplifiers · SOT-89 -HMC589AST89ETR from Analog Devices, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+HMC589AST89ETR from Analog Devices, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | IN | input | RF input pin, DC coupled. An off-chip DC blocking capacitor is required on RFIN. 50 Ω input impedance. Absolute maximum RF input power: +10 dBm up to 1 GHz, +8 dBm from 1-4 GHz (Vcc = +5 Vdc). |-| 2 | GND | power_in | Ground pin. This pin and the package bottom (exposed ground paddle) must be connected to RF/DC ground. |-| 3 | OUT | output | RF output pin and DC bias (Vcc) feed for the output stage. Requires an external DC blocking capacitor on RFOUT and an external bias inductor (L1) to Vcc through a bias resistor Rbias (1.8 Ω for Vs = 5 V, Icc = 88 mA). 50 Ω output impedance. |-| 4 | GND | power_in | Ground pin (the large tab on SOT-89). This pin and the package bottom must be connected to RF/DC ground; also serves as the primary thermal path (junction-to-ground-paddle thermal resistance 127.6 °C/W). |+| 1 | IN | input | RF input. This pin is DC coupled; an off-chip DC blocking capacitor is required. |+| 2 | GND | power_in | Ground. ADI lists GND as pins 2 and 4: pin 4 is the package tab/bottom (marked (2) on the RK-3 outline, p.4), which KiCad's SOT-89-3 joins to pad 2 as one pad. These pins and the package bottom must be connected to RF/DC ground. |+| 3 | OUT | output | RF output and DC bias (Vcc) for the output stage. An external DC blocking capacitor is required. |  ## Key specifications @@ -20,13 +19,52 @@ HMC589AST89ETR from Analog Devices, in a SOT-89. Pinout and pin descriptions ext | Manufacturer | Analog Devices | | Package | SOT-89 | | Category | RF And Wireless |-| Pins | 4 |+| Pins | 3 | -## Ordering variants+## Electrical characteristics -Same part, different packaging or reel option.+Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data). -- `HMC589AST89ETR`+| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Gain, DC - 1.0 GHz |  | 19 | 21 |  | dB | DC - 1.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Gain, 1.0 - 2.0 GHz |  | 16 | 19 |  | dB | 1.0 - 2.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Gain, 2.0 - 3.0 GHz |  | 14 | 17 |  | dB | 2.0 - 3.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Gain, 3.0 - 4.0 GHz |  | 13 | 16 |  | dB | 3.0 - 4.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Input Return Loss, DC - 1.0 GHz |  | 17 |  |  | dB | DC - 1.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Input Return Loss, 1.0 - 4.0 GHz |  | 10 |  |  | dB | 1.0 - 4.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Return Loss, DC - 1.0 GHz |  | 12 |  |  | dB | DC - 1.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Power for 1 dB Compression (P1dB), 0.5 - 1.0 GHz | P1dB | 17.5 | 19 |  | dBm | 0.5 - 1.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Power for 1 dB Compression (P1dB), 1.0 - 2.0 GHz | P1dB | 16 | 19 |  | dBm | 1.0 - 2.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Power for 1 dB Compression (P1dB), 2.0 - 3.0 GHz | P1dB | 16 | 19 |  | dBm | 2.0 - 3.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Power for 1 dB Compression (P1dB), 3.0 - 4.0 GHz | P1dB | 14.5 | 18 |  | dBm | 3.0 - 4.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Gain Variation Over Temperature |  |  | 0.008 |  | dB/°C | DC - 5 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Reverse Isolation |  |  | 23 |  | dB | DC - 4 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Third Order Intercept (IP3), 0.5 - 1.0 GHz | IP3 |  | 33 |  | dBm | 0.5 - 1.0 GHz; Pout=0 dBm per tone, 1 MHz spacing; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Third Order Intercept (IP3), 1.0 - 2.0 GHz | IP3 |  | 32 |  | dBm | 1.0 - 2.0 GHz; Pout=0 dBm per tone, 1 MHz spacing; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Third Order Intercept (IP3), 2.0 - 3.0 GHz | IP3 |  | 31.5 |  | dBm | 2.0 - 3.0 GHz; Pout=0 dBm per tone, 1 MHz spacing; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Output Third Order Intercept (IP3), 3.0 - 4.0 GHz | IP3 |  | 29 |  | dBm | 3.0 - 4.0 GHz; Pout=0 dBm per tone, 1 MHz spacing; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Noise Figure, DC - 2.0 GHz | NF |  | 4 |  | dB | DC - 2.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Noise Figure, 2.0 - 4.0 GHz | NF |  | 4.5 |  | dB | 2.0 - 4.0 GHz; Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Supply Current | Icq |  | 82 | 102 | mA | Vs=5V, Rbias=1.8 Ohm, TA=+25°C (table header) | 1 |+| Collector Bias Voltage | Vcc |  |  | 5.5 | Vdc |  | 4 |+| RF Input Power (RFIN), Vcc = +5 Vdc, up to 1 GHz | RFIN |  |  | 10 | dBm | Vcc = +5 Vdc; up to 1 GHz | 4 |+| RF Input Power (RFIN), Vcc = +5 Vdc, 1 - 4 GHz | RFIN |  |  | 8 | dBm | Vcc = +5 Vdc; 1 - 4 GHz | 4 |+| Junction Temperature |  |  |  | 150 | °C |  | 4 |+| Continuous Pdiss | Pdiss |  |  | 0.51 | W | T = 85 °C; derate 7.84 mW/°C above 85 °C | 4 |+| Storage Temperature |  | -65 |  | 150 | °C |  | 4 |+| Operating Temperature |  | -40 |  | 85 | °C |  | 4 |+| Thermal Resistance |  |  | 127.6 |  | °C/W | junction to ground paddle | 4 |+| Supply Voltage (Vs) | Vs |  | 5 |  | V | Single positive supply | 1 |+| Bias Resistor (Rbias) for Vs = 5V | Rbias |  | 1.8 |  | Ω | Vs = 5V; Icc = 88 mA; Rbias power rating 1/8 W | 5 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts |  | tin | Part Number Package Body Material Lead Finish MSL Rating Package Marking [2] HMC589AST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [1] H589A | 4 |  ## CAD (KiCad official) @@ -39,7 +77,7 @@ Same part, different packaging or reel option.  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916679774101504) (6 pp, sha256 `dd4a77fbd5051ad4`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/hmc589ast89e.pdf) (6 pp, sha256 `f8b0080778dc6e3b`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/hmc589ast89etr-datasheet.pdf
⋯ 1 unchanged line ⋯
hmc589ast89etr-hero.glbadded
⋯ 1 unchanged line ⋯
hmc589ast89etr-hero.overlay.jsonadded+155
@@ -0,0 +1,155 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "HMC589AST89ETR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 3,+   "span_mm": 3.9,+   "dash_mm": 0.12,+   "gap_mm": 0.072,+   "pad_stroke_mm": 0.03+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.05,+  "over_pads": false,+  "tolerance_mm": 0.368,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -2.25,+   1.75,+   -2.25,+   2.25+  ],+  "pads_bbox_mm": [+   -2.6,+   2.0,+   -1.95,+   1.95+  ],+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "hmc589ast89etr-etched.glb",+  "glb_sha256": "0e39047e4b853a77e186e907904635bea255684cde1fd514c652562c94c9d585",+  "footprint": "hmc589ast89etr.kicad_mod",+  "footprint_sha256": "a3f2a27fc9a4b70914fc8c0b876967e616e21c07700f16ca253b89d04f598614",+  "pins": "page.json component.pins",+  "pins_sha256": "a8d63b5e90b745999488dfa46127adb4a60271559bb5b1b2a2e8c7a1dcbf806f"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "IN",+   "x": -2.75,+   "y": -1.5,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "GND",+   "x": 2.15,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "OUT",+   "x": -2.75,+   "y": 1.5,+   "align": "right",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -1.95,+    -1.5+   ],+   "size_mm": [+    1.3,+    0.9+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "custom",+   "center_mm": [+    -1.8625,+    0.0+   ],+   "size_mm": [+    1.475,+    0.9+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -1.95,+    1.5+   ],+   "size_mm": [+    1.3,+    0.9+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
hmc589ast89etr.kicad_mod+6−40
@@ -107,46 +107,6 @@ 		(layer "F.SilkS") 		(uuid "03f60025-a54a-4254-a246-33ce3be90d45") 	)-	(fp_line-		(start -2.85 2.5)-		(end -2.85 -2.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "1ccf35cf-9ab6-4ebd-acf5-91ed7fd139ac")-	)-	(fp_line-		(start -2.85 2.5)-		(end 2.25 2.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "fb860ebb-567c-41e6-ba95-d70757aa819f")-	)-	(fp_line-		(start 2.25 -2.5)-		(end -2.85 -2.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "8964b4ee-fe9e-41a6-ba3b-9c64f1c1c58d")-	)-	(fp_line-		(start 2.25 -2.5)-		(end 2.25 2.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "d61ba8ac-45a9-465f-8b17-fcba3f4af819")-	) 	(fp_line 		(start -1.25 -1.25) 		(end -0.25 -2.25)@@ -255,4 +215,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -2.85 -2.20) (xy -1.50 -2.20) (xy -1.50 -2.50) (xy 1.50 -2.50) (xy 1.50 -1.12) (xy 2.25 -1.12) (xy 2.25 1.12) (xy 1.50 1.12) (xy 1.50 2.50) (xy -1.50 2.50) (xy -1.50 2.20) (xy -2.85 2.20))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
hmc589ast89etr.kicad_sym+1−5
@@ -16,11 +16,7 @@       (name "GND" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 0.00 180) (length 5.08)-      (name "GND" (effects (font (size 1.27 1.27))))-      (number "4" (effects (font (size 1.27 1.27))))-    )-    (pin output line (at 17.78 -2.54 180) (length 5.08)+    (pin output line (at 17.78 0.00 180) (length 5.08)       (name "OUT" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )
hmc589ast89etr.lbr+17−18
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>SOT-89-3 (symbol synthesized from footprint pads)</description>+<description></description> <packages> <package name="SOT-89-3">   <description>3 pads, 1.5 x 3.9 mm. SOT-89-3</description>@@ -77,31 +77,30 @@ </package> </packages> <symbols>-<symbol name="SOT-89-3">-  <description>SOT-89-3 (symbol synthesized from footprint pads)</description>-  <wire x1="-7.62" y1="3.81" x2="7.62" y2="3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="3.81" x2="7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="-3.81" x2="-7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="-7.62" y1="-3.81" x2="-7.62" y2="3.81" width="0.254" layer="94"/>-  <text x="0" y="6.35" size="1.27" layer="95" align="bottom-center">&gt;NAME</text>-  <text x="0" y="-6.35" size="1.27" layer="96" align="top-center">&gt;VALUE</text>-  <pin name="1" x="-12.7" y="2.54" length="short" direction="pas"/>-  <pin name="2" x="-12.7" y="0" length="short" direction="pas"/>-  <pin name="3" x="12.7" y="2.54" length="short" direction="pas" rot="R180"/>+<symbol name="HMC589AST89ETR">+  <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+  <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="IN" x="-17.78" y="0" length="middle" direction="in"/>+  <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="OUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets>-<deviceset name="SOT-89-3" prefix="U">-  <description>SOT-89-3 (symbol synthesized from footprint pads)</description>+<deviceset name="HMC589AST89ETR" prefix="U">+  <description></description>   <gates>-    <gate name="G$1" symbol="SOT-89-3" x="0" y="0"/>+    <gate name="G$1" symbol="HMC589AST89ETR" x="0" y="0"/>   </gates>   <devices>     <device name="" package="SOT-89-3">       <connects>-        <connect gate="G$1" pin="1" pad="1"/>-        <connect gate="G$1" pin="2" pad="2"/>-        <connect gate="G$1" pin="3" pad="3"/>+        <connect gate="G$1" pin="IN" pad="1"/>+        <connect gate="G$1" pin="GND" pad="2"/>+        <connect gate="G$1" pin="OUT" pad="3"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
package.json+173−6
@@ -1,12 +1,14 @@ {   "slug": "hmc589ast89etr",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "Analog Devices RF Amplifiers, SOT-89. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Analog Devices RF Amplifiers, SOT-89. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "rf and wireless",-    "hmc589ast89etr"+    "hmc589ast89etr",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,171 @@     "docs/hero.png",     "docs/hmc589ast89etr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "hmc589ast89etr-hero.glb",+    "hmc589ast89etr-hero.overlay.json"+  ],+  "component": {+    "mpn": "HMC589AST89ETR",+    "manufacturer": "Analog Devices",+    "package": "SOT-89",+    "pin_count": 3,+    "category": "RF And Wireless",+    "subcategory": "RF Amplifiers",+    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/hmc589ast89e.pdf",+    "parts": {+      "symbol": "hmc589ast89etr.kicad_sym",+      "footprint": "hmc589ast89etr.kicad_mod",+      "model_3d": "hmc589ast89etr-hero.glb",+      "model_3d_plain": "hmc589ast89etr.glb",+      "model_3d_step": "hmc589ast89etr-etched.step",+      "model_3d_step_plain": "hmc589ast89etr.step",+      "lbr": "hmc589ast89etr.lbr"+    },+    "distributor_links": {+      "lcsc": "C661261",+      "digikey": "1127-3329-2-ND",+      "mouser": "584-HMC589AST89ETR"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T05:45:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "1127-3329-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "584-HMC589AST89ETR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "input",+        "description": "RF input. This pin is DC coupled; an off-chip DC blocking capacitor is required."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground. ADI lists GND as pins 2 and 4: pin 4 is the package tab/bottom (marked (2) on the RK-3 outline, p.4), which KiCad's SOT-89-3 joins to pad 2 as one pad. These pins and the package bottom must be connected to RF/DC ground."+      },+      {+        "number": "3",+        "name": "OUT",+        "type": "output",+        "description": "RF output and DC bias (Vcc) for the output stage. An external DC blocking capacitor is required."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/hmc589ast89e.pdf",+        "pages": 6,+        "sha256": "f8b0080778dc6e3b",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 3,+        "described": 3,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "hmc589ast89etr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.5,+          1.52+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.05,+        "footprint_binding": "identity",+        "sha256": "844c0bb504d0c383535d9845c6376fe7a4053241a2ede8d8ef694df3fcfc37c8",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "hmc589ast89etr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.5,+          1.52+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.05,+        "footprint_binding": "identity",+        "sha256": "59c52417976eafb0b4f2359fb728fce27999845dae55b3a62ee9713a4f51552a",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "package_dims": {+      "package_code": "RK-3 (SOT-89)",+      "source_page": 4,+      "D": {+        "nom_mm": 4.5,+        "range_mm": [+          4.4,+          4.6+        ]+      },+      "E1": {+        "nom_mm": 2.45,+        "range_mm": [+          2.3,+          2.6+        ]+      },+      "E": {+        "nom_mm": 4.095,+        "range_mm": [+          3.94,+          4.25+        ]+      },+      "e": {+        "nom_mm": 1.5,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.5,+        "range_mm": [+          1.4,+          1.6+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "hmc589ast89etr.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }+  }+}
page.json+96−34
@@ -4,69 +4,81 @@   "slug": "hmc589ast89etr",   "title": "HMC589AST89ETR",   "brief": "Analog Devices RF Amplifiers, SOT-89. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "rf and wireless",-    "hmc589ast89etr"+    "hmc589ast89etr",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "HMC589AST89ETR",     "manufacturer": "Analog Devices",     "package": "SOT-89",-    "pin_count": 4,+    "pin_count": 3,     "category": "RF And Wireless",     "subcategory": "RF Amplifiers",-    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916679774101504",+    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/hmc589ast89e.pdf",     "parts": {       "symbol": "hmc589ast89etr.kicad_sym",       "footprint": "hmc589ast89etr.kicad_mod",-      "model_3d": "hmc589ast89etr-etched.glb",+      "model_3d": "hmc589ast89etr-hero.glb",       "model_3d_plain": "hmc589ast89etr.glb",       "model_3d_step": "hmc589ast89etr-etched.step",       "model_3d_step_plain": "hmc589ast89etr.step",       "lbr": "hmc589ast89etr.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C661261",+      "digikey": "1127-3329-2-ND",+      "mouser": "584-HMC589AST89ETR"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T05:45:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "1127-3329-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "584-HMC589AST89ETR",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",         "name": "IN",         "type": "input",-        "description": "RF input pin, DC coupled. An off-chip DC blocking capacitor is required on RFIN. 50 Ω input impedance. Absolute maximum RF input power: +10 dBm up to 1 GHz, +8 dBm from 1-4 GHz (Vcc = +5 Vdc)."+        "description": "RF input. This pin is DC coupled; an off-chip DC blocking capacitor is required."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Ground pin. This pin and the package bottom (exposed ground paddle) must be connected to RF/DC ground."+        "description": "Ground. ADI lists GND as pins 2 and 4: pin 4 is the package tab/bottom (marked (2) on the RK-3 outline, p.4), which KiCad's SOT-89-3 joins to pad 2 as one pad. These pins and the package bottom must be connected to RF/DC ground."       },       {         "number": "3",         "name": "OUT",         "type": "output",-        "description": "RF output pin and DC bias (Vcc) feed for the output stage. Requires an external DC blocking capacitor on RFOUT and an external bias inductor (L1) to Vcc through a bias resistor Rbias (1.8 Ω for Vs = 5 V, Icc = 88 mA). 50 Ω output impedance."-      },-      {-        "number": "4",-        "name": "GND",-        "type": "power_in",-        "description": "Ground pin (the large tab on SOT-89). This pin and the package bottom must be connected to RF/DC ground; also serves as the primary thermal path (junction-to-ground-paddle thermal resistance 127.6 °C/W)."+        "description": "RF output and DC bias (Vcc) for the output stage. An external DC blocking capacitor is required."       }     ],     "provenance": {       "extractor": "ds2sf",       "datasheet": {-        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916679774101504",+        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/hmc589ast89e.pdf",         "pages": 6,-        "sha256": "dd4a77fbd5051ad4",-        "source_tier": "lcsc"+        "sha256": "f8b0080778dc6e3b",+        "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 4,-        "described": 4,+        "total": 3,+        "described": 3,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -84,15 +96,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          4.0,+          4,           4.5,           1.52         ],-        "zmin_mm": 0.0,+        "zmin_mm": 0,         "centre_offset_mm": 0.05,         "footprint_binding": "identity",         "sha256": "844c0bb504d0c383535d9845c6376fe7a4053241a2ede8d8ef694df3fcfc37c8",-        "checked": "2026-10-07",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -103,18 +115,66 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          4.0,+          4,           4.5,           1.52         ],-        "zmin_mm": 0.0,+        "zmin_mm": 0,         "centre_offset_mm": 0.05,         "footprint_binding": "identity",-        "sha256": "a32da423e14e5136f79f5e8e5ddeac3e8b465b6b507263e7aa89f5d3fd26dd6b",-        "checked": "2026-10-07",+        "sha256": "59c52417976eafb0b4f2359fb728fce27999845dae55b3a62ee9713a4f51552a",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "RK-3 (SOT-89)",+      "source_page": 4,+      "D": {+        "nom_mm": 4.5,+        "range_mm": [+          4.4,+          4.6+        ]+      },+      "E1": {+        "nom_mm": 2.45,+        "range_mm": [+          2.3,+          2.6+        ]+      },+      "E": {+        "nom_mm": 4.095,+        "range_mm": [+          3.94,+          4.25+        ]+      },+      "e": {+        "nom_mm": 1.5,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.5,+        "range_mm": [+          1.4,+          1.6+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "hmc589ast89etr.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   },   "metadata": {     "specs": {@@ -161,10 +221,12 @@     "docs/hero.png",     "docs/hmc589ast89etr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "hmc589ast89etr-hero.glb",+    "hmc589ast89etr-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-24T21:56:46.892Z"-}+  "visibility": "public",+  "updated_at": "2026-09-24T21:56:46.892Z",+  "description": "Analog Devices RF Amplifiers, SOT-89. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/HMC589AST89ETR footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-3.250 -2.940 5.900 5.840' style='width:100%;height:100%'><line class='ly-silk' x1='-1.220' y1='-2.360' x2='1.360' y2='-2.360' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.360' y1='-1.380' x2='1.360' y2='-2.360' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.360' y1='1.380' x2='1.360' y2='2.360' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.360' y1='2.360' x2='-1.360' y2='2.360' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-2.850' y1='2.500' x2='-2.850' y2='-2.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.850' y1='2.500' x2='2.250' y2='2.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.250' y1='-2.500' x2='-2.850' y2='-2.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.250' y1='-2.500' x2='2.250' y2='2.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-fab' x1='-1.250' y1='-1.250' x2='-0.250' y2='-2.250' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.250' y1='2.250' x2='-1.250' y2='-1.250' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.250' y1='-2.250' x2='1.250' y2='-2.250' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='1.250' y1='-2.250' x2='1.250' y2='2.250' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='1.250' y1='2.250' x2='-1.250' y2='2.250' stroke='#f472b6' stroke-width='0.100'/><polygon class='ly-silk' points='-1.770,-2.210 -2.010,-2.540 -1.530,-2.540 -1.770,-2.210' fill='#d8b4fe' stroke='none'/><rect class='ly-copper pad' data-num='1' data-name='IN' x='-2.600' y='-1.950' width='1.300' height='0.900' rx='0.225' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.950' y='-1.500' font-size='0.540' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='-2.600' y='-0.450' width='1.475' height='0.900' rx='0.000' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.863' y='0.000' font-size='0.540' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='OUT' x='-2.600' y='1.050' width='1.300' height='0.900' rx='0.225' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.950' y='1.500' font-size='0.540' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/HMC589AST89ETR", PINS=[{"desc":"","name":"IN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"GND","number":"4","type":""},{"desc":"","name":"OUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>hmc589ast89etr</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/HMC589AST89ETR symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -200 1500 400' style='width:100%;height:100%'><rect x='-500.0' y='-150.0' width='1000.0' height='300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='IN'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>IN</text><g class='pingroup' data-num='2' data-name='GND'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='4' data-name='GND'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>GND</text><g class='pingroup' data-num='3' data-name='OUT'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>OUT</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/HMC589AST89ETR", PINS=[{"desc":"","name":"IN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"GND","number":"4","type":""},{"desc":"","name":"OUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>hmc589ast89etr</title>\ No newline at end of file