← Commit history
page.json+17−14@@ -32,49 +32,49 @@ "number": "1", "name": "C1P", "type": "passive",- "description": "Positive terminal of the charge-pump flying capacitor C1 (typ. 0.1 \u00b5F) used by the internal doubler that generates VP from VCC."+ "description": "Positive terminal of the charge-pump flying capacitor C1 (typ. 0.1 µF) used by the internal doubler that generates VP from VCC." }, { "number": "2", "name": "VP", "type": "power_out",- "description": "Regulated positive charge-pump output, nominally +5.5 V (VCC\u00d72 clamped). Bypass to GND with a 0.1 \u00b5F ceramic capacitor. Absolute-max +7.0 V."+ "description": "Regulated positive charge-pump output, nominally +5.5 V (VCC×2 clamped). Bypass to GND with a 0.1 µF ceramic capacitor. Absolute-max +7.0 V." }, { "number": "3", "name": "C1N", "type": "passive",- "description": "Negative terminal of the charge-pump flying capacitor C1 (typ. 0.1 \u00b5F) for the internal voltage doubler."+ "description": "Negative terminal of the charge-pump flying capacitor C1 (typ. 0.1 µF) for the internal voltage doubler." }, { "number": "4", "name": "C2P", "type": "passive",- "description": "Positive terminal of the charge-pump flying capacitor C2 (typ. 0.1 \u00b5F) used by the internal inverter that generates VN from VP."+ "description": "Positive terminal of the charge-pump flying capacitor C2 (typ. 0.1 µF) used by the internal inverter that generates VN from VP." }, { "number": "5", "name": "C2N", "type": "passive",- "description": "Negative terminal of the charge-pump flying capacitor C2 (typ. 0.1 \u00b5F) for the internal voltage inverter."+ "description": "Negative terminal of the charge-pump flying capacitor C2 (typ. 0.1 µF) for the internal voltage inverter." }, { "number": "6", "name": "VN", "type": "power_out",- "description": "Regulated negative charge-pump output, nominally \u22125.5 V. Bypass to GND with a 0.1 \u00b5F ceramic capacitor. Absolute-max range \u22120.7 V to +0.3 V referenced to GND (i.e. always negative in normal operation)."+ "description": "Regulated negative charge-pump output, nominally −5.5 V. Bypass to GND with a 0.1 µF ceramic capacitor. Absolute-max range −0.7 V to +0.3 V referenced to GND (i.e. always negative in normal operation)." }, { "number": "7", "name": "T2OUT", "type": "output",- "description": "RS-232 driver 2 output. Swings between VP and VN (typ. \u00b15 V) to meet EIA/TIA-232 levels. ESD-protected to \u00b115 kV HBM, \u00b115 kV IEC61000-4-2 air-gap, \u00b18 kV IEC61000-4-2 contact."+ "description": "RS-232 driver 2 output. Swings between VP and VN (typ. ±5 V) to meet EIA/TIA-232 levels. ESD-protected to ±15 kV HBM, ±15 kV IEC61000-4-2 air-gap, ±8 kV IEC61000-4-2 contact." }, { "number": "8", "name": "R2IN", "type": "input",- "description": "RS-232 receiver 2 input. Accepts \u00b120 V (abs-max) RS-232 line levels through an internal 5 k\u03a9 terminating resistor to GND. \u00b115 kV ESD-protected."+ "description": "RS-232 receiver 2 input. Accepts ±20 V (abs-max) RS-232 line levels through an internal 5 kΩ terminating resistor to GND. ±15 kV ESD-protected." }, { "number": "9",@@ -86,13 +86,13 @@ "number": "10", "name": "T2IN", "type": "input",- "description": "Driver 2 CMOS/TTL logic input. Inverted by driver 2 and level-shifted onto T2OUT at RS-232 levels. Absolute-max \u22120.3 V to +6.0 V."+ "description": "Driver 2 CMOS/TTL logic input. Inverted by driver 2 and level-shifted onto T2OUT at RS-232 levels. Absolute-max −0.3 V to +6.0 V." }, { "number": "11", "name": "T1IN", "type": "input",- "description": "Driver 1 CMOS/TTL logic input. Inverted by driver 1 and level-shifted onto T1OUT at RS-232 levels. Absolute-max \u22120.3 V to +6.0 V."+ "description": "Driver 1 CMOS/TTL logic input. Inverted by driver 1 and level-shifted onto T1OUT at RS-232 levels. Absolute-max −0.3 V to +6.0 V." }, { "number": "12",@@ -104,13 +104,13 @@ "number": "13", "name": "R1IN", "type": "input",- "description": "RS-232 receiver 1 input. Accepts \u00b120 V (abs-max) RS-232 line levels through an internal 5 k\u03a9 terminating resistor to GND. \u00b115 kV ESD-protected."+ "description": "RS-232 receiver 1 input. Accepts ±20 V (abs-max) RS-232 line levels through an internal 5 kΩ terminating resistor to GND. ±15 kV ESD-protected." }, { "number": "14", "name": "T1OUT", "type": "output",- "description": "RS-232 driver 1 output. Swings between VP and VN (typ. \u00b15 V) to meet EIA/TIA-232 levels. ESD-protected to \u00b115 kV HBM, \u00b115 kV IEC61000-4-2 air-gap, \u00b18 kV IEC61000-4-2 contact."+ "description": "RS-232 driver 1 output. Swings between VP and VN (typ. ±5 V) to meet EIA/TIA-232 levels. ESD-protected to ±15 kV HBM, ±15 kV IEC61000-4-2 air-gap, ±8 kV IEC61000-4-2 contact." }, { "number": "15",@@ -122,7 +122,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "Main supply, +3 V to +5.5 V (abs-max +6.0 V). Bypass to GND with a 0.1 \u00b5F ceramic capacitor close to the pin. Typical ICC is 0.5 mA."+ "description": "Main supply, +3 V to +5.5 V (abs-max +6.0 V). Bypass to GND with a 0.1 µF ceramic capacitor close to the pin. Typical ICC is 0.5 mA." } ], "provenance": {@@ -216,5 +216,8 @@ "docs/hgx3232aeimt-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }