← Commit history
hgx3087eim: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "HGX3087EIM",+ "manufacturer": "HGSEMI",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "RS-485/RS-422 ICs",+ "parts": {+ "symbol": "hgx3087eim.kicad_sym",+ "footprint": "hgx3087eim.kicad_mod",+ "model_3d": "hgx3087eim-etched.glb",+ "model_3d_plain": "hgx3087eim.glb",+ "model_3d_step": "hgx3087eim-etched.step",+ "model_3d_step_plain": "hgx3087eim.step",+ "lbr": "hgx3087eim.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply input, 4.5V ≤ VCC ≤ 5.5V (nominal +5.0V). Bypass to GND with a 0.1µF ceramic capacitor placed close to the pin."+ },+ {+ "number": "2",+ "name": "RO",+ "type": "output",+ "description": "Receiver output. Outputs logic high when the differential receiver input (A - B) ≥ -50 mV and logic low when (A - B) ≤ -200 mV. Drives up to IO = ±4 mA at rail-referenced levels (VOH ≥ VCC-0.6V, VOL ≤ 0.4V)."+ },+ {+ "number": "3",+ "name": "DI",+ "type": "input",+ "description": "Driver (transmit) data input. Because the HGX3087E driver has no DE pin, the driver output is always enabled: DI low → Y=low, Z=high; DI high → Y=high, Z=low. CMOS logic thresholds (VIH ≥ 2V, VIL ≤ 0.8V)."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0V) for the device."+ },+ {+ "number": "5",+ "name": "Y",+ "type": "output",+ "description": "Driver non-inverting (true) differential output for the RS-485/RS-422 bus TX pair. Guaranteed differential VOD ≥ 2.1V into a 54Ω load (RS-485) and ≥ 2.7V into 100Ω (RS-422). Tolerates -7V to +12V bus fault voltages."+ },+ {+ "number": "6",+ "name": "Z",+ "type": "output",+ "description": "Driver inverting (complement) differential output for the RS-485/RS-422 bus TX pair. Complements Y; guaranteed differential VOD ≥ 2.1V into 54Ω. Tolerates -7V to +12V bus fault voltages."+ },+ {+ "number": "7",+ "name": "B",+ "type": "input",+ "description": "Receiver inverting differential input for the RS-485/RS-422 bus RX pair. Presents 1/8-unit-load impedance (RIN ≥ 96 kΩ). Tolerates -7V to +12V common-mode range and up to ±16 kV IEC 61000-4-2 ESD."+ },+ {+ "number": "8",+ "name": "A",+ "type": "input",+ "description": "Receiver non-inverting differential input for the RS-485/RS-422 bus RX pair. Presents 1/8-unit-load impedance (RIN ≥ 96 kΩ). True fail-safe: outputs logic high on RO when the pair is open, shorted, or idle-terminated."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}