← Commit history

hgx3085eim: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·e59f822a52 · ·parent 351a6b9
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "HGX3085EIM",+    "manufacturer": "HGSEMI",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "RS-485 / RS-422 ICs",+    "parts": {+      "symbol": "hgx3085eim.kicad_sym",+      "footprint": "hgx3085eim.kicad_mod",+      "model_3d": "hgx3085eim-etched.glb",+      "model_3d_plain": "hgx3085eim.glb",+      "model_3d_step": "hgx3085eim-etched.step",+      "model_3d_step_plain": "hgx3085eim.step",+      "lbr": "hgx3085eim.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "RO",+        "type": "output",+        "description": "Receiver output. When RE is low, RO is a logic high if (A - B) ≥ -50mV and a logic low if (A - B) ≤ -200mV. RO is high-impedance when the receiver is disabled (RE high) and true fail-safe holds RO high when the differential inputs are open or shorted."+      },+      {+        "number": "2",+        "name": "RE",+        "type": "input",+        "description": "Active-low receiver output enable (with hot-swap input structure). RO is enabled when RE is low and high-impedance when RE is high. Driving RE high while DE is low for >700ns places the device in low-power shutdown mode (ISHDN ≈ 0.05µA typ)."+      },+      {+        "number": "3",+        "name": "DE",+        "type": "input",+        "description": "Active-high driver output enable (with hot-swap input structure). Driver outputs A and B are active when DE is high and high-impedance when DE is low. Holding DE low with RE high enters low-power shutdown mode."+      },+      {+        "number": "4",+        "name": "DI",+        "type": "input",+        "description": "Driver data input. With DE high, a logic low on DI forces A/Y low and B/Z high; a logic high on DI forces A/Y high and B/Z low. VIH ≥ 2V, VIL ≤ 0.8V, input current ±1µA."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the transceiver."+      },+      {+        "number": "6",+        "name": "A",+        "type": "bidirectional",+        "description": "Non-inverting receiver input and non-inverting driver output (half-duplex bus line A/Y). Absolute maximum bus voltage -7V to +12V; receiver differential threshold -200mV to -50mV; driver differential output ≥ 2.1V into 54Ω; ±16kV IEC 61000-4-2 ESD protection."+      },+      {+        "number": "7",+        "name": "B",+        "type": "bidirectional",+        "description": "Inverting receiver input and inverting driver output (half-duplex bus line B/Z). Absolute maximum bus voltage -7V to +12V; receiver differential threshold -200mV to -50mV; driver differential output ≥ 2.1V into 54Ω; ±16kV IEC 61000-4-2 ESD protection."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply, 4.5V ≤ VCC ≤ 5.5V. Bypass to GND with a 0.1µF ceramic capacitor placed close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}