← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# HGX232EIMT++**HGSEMI** · RS232 ICs · TSSOP-16++HGX232EIMT from HGSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C1+ | passive | Positive terminal of the flying capacitor for the positive charge-pump voltage multiplier. Connect a 0.1 uF capacitor between C1+ (pin 1) and C1- (pin 3). |+| 2 | V+ | power_out | Output of the positive voltage multiplier (approx. +2*VCC, typ. +10V). Requires an external 0.1 uF reservoir capacitor to GND. Used internally as the positive rail for the RS-232 line drivers. |+| 3 | C1- | passive | Negative terminal of the flying capacitor for the positive charge-pump voltage multiplier. Pair with C1+ (pin 1) via a 0.1 uF capacitor. |+| 4 | C2+ | passive | Positive terminal of the flying capacitor for the negative charge-pump voltage inverter. Connect a 0.1 uF capacitor between C2+ (pin 4) and C2- (pin 5). |+| 5 | C2- | passive | Negative terminal of the flying capacitor for the negative charge-pump voltage inverter. Pair with C2+ (pin 4) via a 0.1 uF capacitor. |+| 6 | V- | power_out | Output of the negative voltage inverter (approx. -2*VCC, typ. -10V). Requires an external 0.1 uF reservoir capacitor to GND. Used internally as the negative rail for the RS-232 line drivers. |+| 7 | T2OUT | output | Transmitter 2 output at RS-232 levels (typically +/-5V into 3 kOhm load). Inverting driver output for the T2IN TTL/CMOS input. Short-circuit current limited to +/-60 mA. |+| 8 | R2IN | input | Receiver 2 input at RS-232 levels. Accepts -30V to +30V input range with internal 5 kOhm pull-down (input resistance 3-7 kOhm). Switching thresholds Von ~2.4V / Voff ~0.8V with hysteresis. |+| 9 | R2OUT | output | Receiver 2 output at TTL/CMOS levels. Inverting receiver output driving VOL <= 0.4V @ 3.2 mA and VOH >= 3.5V @ -1.0 mA on VCC = 4.5V. |+| 10 | T2IN | input | Transmitter 2 input at TTL/CMOS levels. Drives T2OUT (pin 7) as an RS-232 output. Input current is 1.0 mkA typical, 10 mkA over temperature. |+| 11 | T1IN | input | Transmitter 1 input at TTL/CMOS levels. Drives T1OUT (pin 14) as an RS-232 output. Input current 1.0 mkA typical. |+| 12 | R1OUT | output | Receiver 1 output at TTL/CMOS levels. Inverting receiver output driving VOL <= 0.4V @ 3.2 mA and VOH >= 3.5V @ -1.0 mA on VCC = 4.5V. |+| 13 | R1IN | input | Receiver 1 input at RS-232 levels. Accepts -30V to +30V input range with internal 5 kOhm pull-down (input resistance 3-7 kOhm). Switching thresholds Von ~2.4V / Voff ~0.8V with hysteresis. |+| 14 | T1OUT | output | Transmitter 1 output at RS-232 levels (typically +/-5V into 3 kOhm load). Inverting driver output for the T1IN TTL/CMOS input. Short-circuit current limited to +/-60 mA. |+| 15 | GND | power_in | Common ground reference for logic and RS-232 sides, and return for the charge-pump reservoir capacitors on V+ and V-. |+| 16 | VCC | power_in | Positive supply input, 4.5 V to 5.5 V (absolute max 6.0 V). Bypass with 0.1 uF to GND. Static consumption current ICC = 10 mA typ / 14 mA max. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `HGX232EIMT/TR`+- `HGX232ECM/TR`+- `HGX232EIM/TR`+- `HGX232ECN`+- `HGX232EIN`++## CAD (KiCad official)++- Symbol: `HGX232EIMT`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hgx232eimt-datasheet.pdf) (11 pp, sha256 `10f1bf5b12850453`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hgx232eimt-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hgx232eimt",+ "version": "0.1.0",+ "type": "component",+ "description": "HGSEMI RS232 ICs, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "hgx232eimt"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hgx232eimt.kicad_sym",+ "hgx232eimt.kicad_mod",+ "hgx232eimt.glb",+ "hgx232eimt.step",+ "hgx232eimt.lbr",+ "docs/hero.png",+ "docs/hgx232eimt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}