← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# HG9200BM++**HGSEMI** · Audio Interface ICs · SOP-14++HG9200BM from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CE | input | Chip enable, active low. CMOS input with internal pull-high. Drive low to enable oscillator and DTMF output; drive high to place the device in standby (I_STB ≤ 2 µA at 5 V). |+| 2 | X2 | output | Oscillator output. Along with X1 forms the inverter/bias-resistor oscillator with on-chip load capacitors. Connect a standard 3.579545 MHz crystal between X1 and X2. |+| 3 | X1 | input | Oscillator input. Connect a standard 3.579545 MHz crystal or ceramic resonator between X1 and X2. Internal bias resistor (~10 MΩ) and load caps (~20 pF/10 pF) are integrated. |+| 4 | VSS | power_in | Negative supply / ground reference. |+| 5 | NC | unconnected | No internal connection. Leave floating or tie to ground per board convention. |+| 6 | D0 | input | Parallel-mode data input bit 0 (LSB of the 4-bit digit code in Table 2). In serial mode this pin is pulled high internally and should be left floating; in parallel mode it must not be floated. |+| 7 | D1 | input | Parallel-mode data input bit 1. Pull-high internal resistor when in serial mode; drive as parallel data input when S/P=H. |+| 8 | D2 | input | Parallel-mode data input bit 2. Pull-high internal resistor when in serial mode; drive as parallel data input when S/P=H. |+| 9 | D3 | input | Parallel-mode data input bit 3 (MSB of the 4-bit parallel code). Pull-high internal resistor when in serial mode; drive as parallel data input when S/P=H. |+| 10 | S/P | input | Operation-mode select. CMOS input: S/P = H selects parallel mode (D0-D3 drive the tone code); S/P = L selects serial mode (DATA/CLK stream a 5-bit code). |+| 11 | CLK | input | Serial-mode synchronous clock input. In parallel mode this pin is pulled high internally and can be left floating; in serial mode it clocks in 5-bit codes on the falling edge (100 kHz typ, 500 kHz max). |+| 12 | DATA | input | Serial-mode data input. In parallel mode this pin is pulled high internally and can be left floating; in serial mode it is latched on the falling edge of CLK, D0 (LSB) first. |+| 13 | DTMF | output | DTMF analog output. CMOS output providing the selected single/dual tone (V_TAC ≈ 0.15 Vrms into R_L=5 kΩ, DC level ≈ 0.45-0.75 × VDD). Requires R_L ≥ 5 kΩ. |+| 14 | VDD | power_in | Positive supply, 2.0-5.5 V for normal operation. I_DD ≈ 240 µA at 2.5 V and 950 µA at 5.0 V with CE=VSS and no load. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | SOP-14 |+| Category | Interface |+| Pins | 14 |++## Ordering variants++Same part, different packaging or reel option.++- `HG9200BM/TR`+- `HG9200BMAN`+- `HG9200BMAM/TR`++## CAD (KiCad official)++- Symbol: `HG9200BM`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOP-14 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hg9200bm-datasheet.pdf) (12 pp, sha256 `e155baa26afbb02c`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hg9200bm-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hg9200bm",+ "version": "0.1.0",+ "type": "component",+ "description": "HGSEMI Audio Interface ICs, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "hg9200bm"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hg9200bm.kicad_sym",+ "hg9200bm.kicad_mod",+ "hg9200bm.glb",+ "hg9200bm.step",+ "hg9200bm.lbr",+ "docs/hero.png",+ "docs/hg9200bm-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}