← Commit history
hg65hvd230m: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -31,5 +31,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "HG65HVD230M",+ "manufacturer": "HGSEMI",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "CAN ICs",+ "parts": {+ "symbol": "hg65hvd230m.kicad_sym",+ "footprint": "hg65hvd230m.kicad_mod",+ "model_3d": "hg65hvd230m-etched.glb",+ "model_3d_plain": "hg65hvd230m.glb",+ "model_3d_step": "hg65hvd230m-etched.step",+ "model_3d_step_plain": "hg65hvd230m.step",+ "lbr": "hg65hvd230m.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "TXD",+ "type": "input",+ "description": "Transmit data input from the CAN controller. A logic low forces the bus to the dominant state; a logic high releases the bus to the recessive state. Internally pulled up to VCC so that an unconnected TXD stays recessive. VIH >= 2 V, VIL <= 0.8 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference (0 V). All voltages in the datasheet are referenced to this pin."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage input. Operating range 4.75 V to 5.25 V (absolute max 6 V). Standby ICC ~10 uA typ; normal recessive ~5 mA typ; normal dominant ~50 mA typ."+ },+ {+ "number": "4",+ "name": "RXD",+ "type": "output",+ "description": "Receive data output to the CAN controller, reporting the state of the CAN bus. Low = bus dominant, high = bus recessive. In standby, RXD indicates whether a wake-up request has been detected on the bus. IOL up to 6 mA typ; VOH ~ VCC-0.7 V."+ },+ {+ "number": "5",+ "name": "SPLIT",+ "type": "output",+ "description": "Common-mode stabilization output for split-termination networks. In normal mode drives approximately 0.5*VCC (typ) to stabilize the recessive common-mode bus voltage and improve EME; high-impedance (floating) in standby mode. Rated for -27 V to +40 V DC and ISO 7637 transients."+ },+ {+ "number": "6",+ "name": "CANL",+ "type": "bidirectional",+ "description": "Low-side CAN bus line. Driven low in the dominant state (V(CANL)(dom) typ 1.4 V) and released to ~0.5*VCC in recessive. Withstands -27 V to +40 V DC and +/-200 V ISO 7637 transients, +/-6 kV HBM ESD."+ },+ {+ "number": "7",+ "name": "CANH",+ "type": "bidirectional",+ "description": "High-side CAN bus line. Driven high in the dominant state (V(CANH)(dom) typ 3.6 V) and released to ~0.5*VCC in recessive. Withstands -27 V to +40 V DC and +/-200 V ISO 7637 transients, +/-6 kV HBM ESD."+ },+ {+ "number": "8",+ "name": "STB",+ "type": "input",+ "description": "Standby mode control input. Low = normal mode (transmitter and receiver active); high = low-power standby mode (transmitter off, low-power receiver monitors bus for wake-up). Internally pulled up to VCC so that a floating STB defaults the device to standby. VIH >= 2 V, VIL <= 0.8 V."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}