← Commit history
hg2594m-3-3: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "HG2594M-3.3",+ "manufacturer": "HGSEMI HG2594M 3 3 TR",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "AC-DC Controllers and Regulators",+ "parts": {+ "symbol": "hg2594m-3-3.kicad_sym",+ "footprint": "hg2594m-3-3.kicad_mod",+ "model_3d": "hg2594m-3-3-etched.glb",+ "model_3d_plain": "hg2594m-3-3.glb",+ "model_3d_step": "hg2594m-3-3-etched.step",+ "model_3d_step_plain": "hg2594m-3-3.step",+ "lbr": "hg2594m-3-3.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. No internal function; leave floating or tie to a copper island for mechanical/thermal support only."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. No internal function; leave floating."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. No internal function; leave floating."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback input. On the fixed 3.3 V version this pin is tied directly to the regulated output; the internal divider senses the output and regulates to the 1.23 V internal reference. Threshold voltage at this pin is 1.23 V."+ },+ {+ "number": "5",+ "name": "ON/OFF",+ "type": "input",+ "description": "Active-low enable input with hysteresis. Logic low (< 0.8 V) or floating enables the regulator; logic high (> 1.4 V) shuts it down. Standby current with ON/OFF held high is typ. 80 µA."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return. Must be routed on the output-side return path (not through the Schottky catch diode loop) to keep switching-current spikes off the analog ground."+ },+ {+ "number": "7",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input. Accepts 4.5 V to 40 V DC (60 V on HV variants). A large-value bulk capacitor between VIN and GND is required to filter input noise."+ },+ {+ "number": "8",+ "name": "OUTPUT",+ "type": "output",+ "description": "Switching-node output of the internal power transistor; drives the external inductor / Schottky catch diode / output capacitor buck network. Rated for 1 A continuous load current with typ. 1.3 V saturation drop."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}