← Commit history
hg24c256cm: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "HG24C256CM",+ "manufacturer": "HGSEMI",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "EEPROM",+ "parts": {+ "symbol": "hg24c256cm.kicad_sym",+ "footprint": "hg24c256cm.kicad_mod",+ "model_3d": "hg24c256cm-etched.glb",+ "model_3d_plain": "hg24c256cm.glb",+ "model_3d_step": "hg24c256cm-etched.step",+ "model_3d_step_plain": "hg24c256cm.step",+ "lbr": "hg24c256cm.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "E0",+ "type": "input",+ "description": "Device address input bit 0. Hard-wired to VCC or GND; forms the least-significant bit of the 3-bit slave-address field, allowing up to 8 devices on one I2C bus. Must match the software address bit in the device address byte."+ },+ {+ "number": "2",+ "name": "E1",+ "type": "input",+ "description": "Device address input bit 1. Hard-wired to VCC or GND; forms the middle bit of the 3-bit slave-address field used to select among up to 8 devices on the bus."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Device address input bit 2. Hard-wired to VCC or GND; forms the most-significant bit of the 3-bit slave-address field used to select among up to 8 devices on the bus."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the power supply. Connect to the system ground."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C Serial Data. Open-drain bidirectional line used to serially transfer command, address, and data. Requires an external pull-up (see Figure 19). VIL max = 0.3*VCC, VIH min = 0.7*VCC; VOL ≤ 0.4V at IOL = 3 mA (VCC > 2V)."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "I2C Serial Clock. Master-driven clock; data on SDA is latched on the rising edge and clocked out on the falling edge. Supports 400 kHz Fast-mode and 1 MHz High-Speed operation from 1.7V-5.5V."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect. When tied to VCC the entire memory array (and Identification Page) is write-protected - data bytes are NACK'd and the array becomes read-only. When tied to GND or left floating, write operations are enabled."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Device power supply, 1.7V to 5.5V. Absolute max 6.0V. Standby current 1 µA max at 5.5V; read current 0.5 mA max at 1 MHz; write current 1 mA max at 5.5V/400 kHz."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}