← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# HG24C256CM++**HGSEMI** · EEPROM · SOP-8++HG24C256CM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E0 | input | Device address input bit 0. Hard-wired to VCC or GND; forms the least-significant bit of the 3-bit slave-address field, allowing up to 8 devices on one I2C bus. Must match the software address bit in the device address byte. |+| 2 | E1 | input | Device address input bit 1. Hard-wired to VCC or GND; forms the middle bit of the 3-bit slave-address field used to select among up to 8 devices on the bus. |+| 3 | E2 | input | Device address input bit 2. Hard-wired to VCC or GND; forms the most-significant bit of the 3-bit slave-address field used to select among up to 8 devices on the bus. |+| 4 | GND | power_in | Ground reference for the power supply. Connect to the system ground. |+| 5 | SDA | bidirectional | I2C Serial Data. Open-drain bidirectional line used to serially transfer command, address, and data. Requires an external pull-up (see Figure 19). VIL max = 0.3*VCC, VIH min = 0.7*VCC; VOL ≤ 0.4V at IOL = 3 mA (VCC > 2V). |+| 6 | SCL | input | I2C Serial Clock. Master-driven clock; data on SDA is latched on the rising edge and clocked out on the falling edge. Supports 400 kHz Fast-mode and 1 MHz High-Speed operation from 1.7V-5.5V. |+| 7 | WP | input | Write Protect. When tied to VCC the entire memory array (and Identification Page) is write-protected - data bytes are NACK'd and the array becomes read-only. When tied to GND or left floating, write operations are enabled. |+| 8 | VCC | power_in | Device power supply, 1.7V to 5.5V. Absolute max 6.0V. Standby current 1 µA max at 5.5V; read current 0.5 mA max at 1 MHz; write current 1 mA max at 5.5V/400 kHz. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `HG24C256CM/TR`+- `HG24C256CMHG24C256CN`+- `HG24C256CMM/TR`+- `HG24C256CMT/TR`++## CAD (KiCad official)++- Symbol: `HG24C256CM`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hg24c256cm-datasheet.pdf) (None pp, sha256 `9b09a64fbd814396`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hg24c256cm-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hg24c256cm",+ "version": "0.1.0",+ "type": "component",+ "description": "HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "hg24c256cm"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hg24c256cm.kicad_sym",+ "hg24c256cm.kicad_mod",+ "hg24c256cm.glb",+ "hg24c256cm.step",+ "hg24c256cm.lbr",+ "docs/hero.png",+ "docs/hg24c256cm-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}