← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# HG24C16N++**HGSEMI** · EEPROM · DIP-8++HG24C16N from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | unconnected | No connect on the HG24C16 (the 16K variant does not use device-address pins). May be left floating or tied to GND for lowest noise. On smaller-density parts in the family, A0 is a hard-wired I2C slave-address input. |+| 2 | A1 | unconnected | No connect on the HG24C16. May be left floating or tied to GND. On smaller-density parts in the family, A1 is a hard-wired I2C slave-address input. |+| 3 | A2 | unconnected | No connect on the HG24C16. May be left floating or tied to GND. On smaller-density parts in the family, A2 is a hard-wired I2C slave-address input. |+| 4 | GND | power_in | Ground reference for supply and all I/O signals. |+| 5 | SDA | bidirectional | I2C serial data. Bidirectional open-drain line; requires an external pull-up resistor to VCC (typically 1.3 kΩ at 2.5-5 V or 10 kΩ at 1.8 V). May be wire-ORed with other open-drain devices on the same bus. |+| 6 | SCL | input | I2C serial clock input. Positive edge clocks data into the EEPROM, negative edge clocks data out. Requires an external pull-up to VCC. Supports up to 1 MHz at 5 V and 400 kHz at 1.7-2.7 V. |+| 7 | WP | input | Write Protect. Tie to GND for normal read/write operation; tie to VCC to hardware-protect the full 16K array against writes. Schmitt-trigger filtered input. |+| 8 | VCC | power_in | Positive supply, 1.7 V to 5.5 V. Typical operating current 0.4 mA (read) / 2.0 mA (write) at 5 V, 100 kHz; standby current 2.0 µA max. Absolute maximum 6.5 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | DIP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `HG24C16NN`+- `HG24C16NM/TR`+- `HG24C16NM-4K/TR`+- `HG24C16NMM/TR`+- `HG24C16NDQ3/TR`+- `HG24C16NDQ2/TR`+- `HG24C16NM8/TR`+- `HG24C16NM5/TR`++## CAD (KiCad official)++- Symbol: `HG24C16N`+- Footprint: `Package_DIP:DIP-8_W7.62mm`+- 3D model: DIP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hg24c16n-datasheet.pdf) (None pp, sha256 `228b5241d9f7dc0a`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hg24c16n-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "hg24c16n",+ "version": "0.1.0",+ "type": "component",+ "description": "HGSEMI EEPROM, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "hg24c16n"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "hg24c16n.kicad_sym",+ "hg24c16n.kicad_mod",+ "hg24c16n.glb",+ "hg24c16n.step",+ "hg24c16n.lbr",+ "docs/hero.png",+ "docs/hg24c16n-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}