← Commit history

Initial commit: component/hg24c08mm

Ray ·4a49d024ce ·
2 files changed +88
README.mdadded+54
@@ -0,0 +1,54 @@+# HG24C08MM++**HGSEMI** · EEPROM · MSOP-8++HG24C08MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | input | Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max. |+| 2 | A1 | input | Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max. |+| 3 | A2 | input | Device address input. Compared against bit A2 of the incoming I²C device-address byte to enable this chip; up to two HG24C08 devices can share a single bus. VIH = 0.7·VCC min, VIL = 0.3·VCC max. Input capacitance 6 pF max. |+| 4 | GND | power_in | Ground reference for supply and logic. |+| 5 | SDA | bidirectional | I²C serial data, bidirectional, open-drain. Requires an external pull-up resistor (typ. 1.3 kΩ at 2.5 V/5 V, 10 kΩ at 1.8 V). Input capacitance 8 pF max. Sinks IOL = 3.0 mA at VOL ≤ 0.4 V (VCC = 5 V). |+| 6 | SCL | input | I²C serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered, filtered input. Max fSCL = 1 MHz at 5 V, 400 kHz at 1.7 V-2.7 V. Input capacitance 6 pF max. |+| 7 | WP | input | Write Protect. Tie to GND for normal read/write operations. When tied to VCC, the entire 8K array is write-protected in hardware. Should not be left floating. |+| 8 | VCC | power_in | Supply voltage, 1.7 V to 5.5 V. Read current ≈ 0.4 mA typ (1 mA max) at 5 V/100 kHz; write current ≈ 2 mA typ (3 mA max); standby current ≤ 2 µA. Decouple with a local bypass capacitor to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | MSOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `HG24C08MM/TR`+- `HG24C08MMN`+- `HG24C08MMM/TR`+- `HG24C08MMM-4K/TR`+- `HG24C08MMM5/TR`+- `HG24C08MMM8/TR`+- `HG24C08MMDQ3/TR`+- `HG24C08MMDQ2/TR`++## CAD (KiCad official)++- Symbol: `HG24C08MM`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hg24c08mm-datasheet.pdf) (None pp, sha256 `228b5241d9f7dc0a`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hg24c08mm-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "hg24c08mm",+  "version": "0.1.0",+  "type": "component",+  "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "hg24c08mm"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "hg24c08mm.kicad_sym",+    "hg24c08mm.kicad_mod",+    "hg24c08mm.glb",+    "hg24c08mm.step",+    "hg24c08mm.lbr",+    "docs/hero.png",+    "docs/hg24c08mm-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file