← Commit history
hg24c08mm: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "HG24C08MM",+ "manufacturer": "HGSEMI",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "EEPROM",+ "parts": {+ "symbol": "hg24c08mm.kicad_sym",+ "footprint": "hg24c08mm.kicad_mod",+ "model_3d": "hg24c08mm-etched.glb",+ "model_3d_plain": "hg24c08mm.glb",+ "model_3d_step": "hg24c08mm-etched.step",+ "model_3d_step_plain": "hg24c08mm.step",+ "lbr": "hg24c08mm.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "A0",+ "type": "input",+ "description": "Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Device/page address input. On the HG24C08 this pin is a No Connect (not used for hardware addressing) and should be tied to GND. Input capacitance 6 pF max."+ },+ {+ "number": "3",+ "name": "A2",+ "type": "input",+ "description": "Device address input. Compared against bit A2 of the incoming I²C device-address byte to enable this chip; up to two HG24C08 devices can share a single bus. VIH = 0.7·VCC min, VIL = 0.3·VCC max. Input capacitance 6 pF max."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for supply and logic."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I²C serial data, bidirectional, open-drain. Requires an external pull-up resistor (typ. 1.3 kΩ at 2.5 V/5 V, 10 kΩ at 1.8 V). Input capacitance 8 pF max. Sinks IOL = 3.0 mA at VOL ≤ 0.4 V (VCC = 5 V)."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "I²C serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered, filtered input. Max fSCL = 1 MHz at 5 V, 400 kHz at 1.7 V-2.7 V. Input capacitance 6 pF max."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect. Tie to GND for normal read/write operations. When tied to VCC, the entire 8K array is write-protected in hardware. Should not be left floating."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage, 1.7 V to 5.5 V. Read current ≈ 0.4 mA typ (1 mA max) at 5 V/100 kHz; write current ≈ 2 mA typ (3 mA max); standby current ≤ 2 µA. Decouple with a local bypass capacitor to GND."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}