← Commit history

hg24c04mm: factory component page (tier=lcsc)

Ray ·8ec16aceeb · ·parent 3517f62
1 file changed +116−8
page.json+116−8
@@ -1,13 +1,126 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "hg24c04mm",+  "title": "HG24C04MM",+  "brief": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "memory",     "hg24c04mm"   ],+  "component": {+    "mpn": "HG24C04MM",+    "manufacturer": "HGSEMI",+    "package": "MSOP-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "EEPROM",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2404031724_HGSEMI-HG24C04MM-TR_C5310846.pdf",+    "parts": {+      "symbol": "hg24c04mm.kicad_sym",+      "footprint": "hg24c04mm.kicad_mod",+      "model_3d": "hg24c04mm.glb",+      "model_3d_step": "hg24c04mm.step",+      "lbr": "hg24c04mm.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "A0",+        "type": "unconnected",+        "description": "Not connected on HG24C04. The device only uses A1 and A2 for hardwired addressing; A0 is a no-connect and can be tied to ground."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Device address input. Hardwired to VCC or GND to set the least-significant device address bit; must match the corresponding bit in the I2C device address word to enable the chip."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "Device address input. Hardwired to VCC or GND. Together with A1, allows up to four HG24C04 devices to share a single I2C bus."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Bidirectional serial data line for the two-wire (I2C) interface. Open-drain output; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain or open-collector devices."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered filtered input for noise suppression. Supports 1 MHz at 5V and 400 kHz at 1.8/2.5/2.7V."+      },+      {+        "number": "7",+        "name": "WP",+        "type": "input",+        "description": "Write Protect input. Tie to GND for normal read/write operation; tie to VCC to hardware-write-protect the full 4K array."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage, 1.7V to 5.5V. Bypass with a 0.1uF ceramic capacitor to GND close to the pin."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2404031724_HGSEMI-HG24C04MM-TR_C5310846.pdf",+        "pages": 19,+        "sha256": "228b5241d9f7dc0a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "HGSEMI",+      "Package": "MSOP-8",+      "Category": "Memory",+      "Pins": "8"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "hg24c04mm"+  ],+  "discovery_pitch": "HG24C04MM (HGSEMI) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +138,5 @@     "docs/hg24c04mm-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file