← Commit history

Initial commit: component/hg24c04mm

Ray ·461d8cc79b ·
2 files changed +88
README.mdadded+54
@@ -0,0 +1,54 @@+# HG24C04MM++**HGSEMI** · EEPROM · MSOP-8++HG24C04MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0 | unconnected | Not connected on HG24C04. The device only uses A1 and A2 for hardwired addressing; A0 is a no-connect and can be tied to ground. |+| 2 | A1 | input | Device address input. Hardwired to VCC or GND to set the least-significant device address bit; must match the corresponding bit in the I2C device address word to enable the chip. |+| 3 | A2 | input | Device address input. Hardwired to VCC or GND. Together with A1, allows up to four HG24C04 devices to share a single I2C bus. |+| 4 | GND | power_in | Ground reference for the device. |+| 5 | SDA | bidirectional | Bidirectional serial data line for the two-wire (I2C) interface. Open-drain output; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain or open-collector devices. |+| 6 | SCL | input | Serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered filtered input for noise suppression. Supports 1 MHz at 5V and 400 kHz at 1.8/2.5/2.7V. |+| 7 | WP | input | Write Protect input. Tie to GND for normal read/write operation; tie to VCC to hardware-write-protect the full 4K array. |+| 8 | VCC | power_in | Positive supply voltage, 1.7V to 5.5V. Bypass with a 0.1uF ceramic capacitor to GND close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | MSOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `HG24C04MM/TR`+- `HG24C04MMN`+- `HG24C04MMM/TR`+- `HG24C04MMM-4K/TR`+- `HG24C04MMM5/TR`+- `HG24C04MMM8/TR`+- `HG24C04MMDQ3/TR`+- `HG24C04MMDQ2/TR`++## CAD (KiCad official)++- Symbol: `HG24C04MM`+- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`+- 3D model: MSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/hg24c04mm-datasheet.pdf) (19 pp, sha256 `228b5241d9f7dc0a`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hg24c04mm-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "hg24c04mm",+  "version": "0.1.0",+  "type": "component",+  "description": "HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "hg24c04mm"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "hg24c04mm.kicad_sym",+    "hg24c04mm.kicad_mod",+    "hg24c04mm.glb",+    "hg24c04mm.step",+    "hg24c04mm.lbr",+    "docs/hero.png",+    "docs/hg24c04mm-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file