← Commit history

hg24c04cm5: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·ccfa9873e3 · ·parent d1b23bc
1 file changed +56−1
page.json+56−1
@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "HG24C04CM5",+    "manufacturer": "HGSEMI",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "EEPROM",+    "parts": {+      "symbol": "hg24c04cm5.kicad_sym",+      "footprint": "hg24c04cm5.kicad_mod",+      "model_3d": "hg24c04cm5-etched.glb",+      "model_3d_plain": "hg24c04cm5.glb",+      "model_3d_step": "hg24c04cm5-etched.step",+      "model_3d_step_plain": "hg24c04cm5.step",+      "lbr": "hg24c04cm5.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCL",+        "type": "input",+        "description": "Serial Clock input. Provides the clock to the device and controls flow of data. Command and input data on SDA are latched on the rising edge of SCL; output data on SDA is clocked out on the falling edge. Schmitt-triggered with integrated spike-suppression filter."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the power supply. Should be connected to system ground."+      },+      {+        "number": "3",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial Data. Open-drain bidirectional I/O used to serially transfer data to and from the device; requires an external pull-up resistor. Schmitt-triggered with integrated spike-suppression filter."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Device Power Supply. Operating range 1.7V to 5.5V. Operations at invalid VCC voltages may produce spurious results."+      },+      {+        "number": "5",+        "name": "WP",+        "type": "input",+        "description": "Write Protection input. Tie to VCC to write-protect the entire memory array (device becomes read-only); tie to GND to enable write operations. If left floating, WP is internally pulled down to GND. When WP is driven high, device/word address bytes are acknowledged but data bytes are not."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}