component

HD3SS3212RKSR

Public Made by Adom

by adom

Texas Instruments Analog Switches - Special Purpose, TQFN-20-EP(2.5x4.5). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentinterfacehd3ss3212rksrboard-derived

Verified HD3SS3212RKSR

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record, 3 retired · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's HD3SS3212 datasheet (SLASE74F, revised September 2016)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SLASE74F, May 2015, revised September 2016; sha256 111def72b5f44bae matches ti.com/lit/ds/symlink/hd3ss3212.pdf fetched 2026-10-27); edition now recorded
  • ✓Pins 1-20 match the Pin Functions table (p.4-5) and the RKS 20-pin VQFN top view (p.4) by number; renamed to the datasheet's spelling: 2 OEN -> OEn (printed without an overbar), 3 A0P -> A0p, 4 A0N -> A0n, 7 A1P -> A1p, 8 A1N -> A1n, 12 C1N -> C1n, 13 C1P -> C1p, 14 C0N -> C0n, 15 C0P -> C0p, 16 B1N -> B1n, 17 B1P -> B1p, 18 B0N -> B0n, 19 B0P -> B0p; RSVD1, RSVD2, SEL, VCC (printed V with subscript CC), GND 5/11/20 unchanged
  • •Pin 21 is the exposed thermal pad, absent from the Pin Functions table: renamed PAD -> GND (power_in) because the design procedure says 'The thermal pad must be connected to ground' (p.14) and the package notes require it soldered to the PCB (p.20)
  • ✓Pin types agree with the table: VCC P and GND G -> power_in, OEn and SEL I -> input, high-speed ports I/O -> bidirectional, RSVD1/RSVD2 O -> output
  • ✓All 21 descriptions rewritten to the table wording (p.4-5) plus its footnote on the 20-kΩ pulldowns; pin 21 described from p.14 and p.20; earlier text cited p.4 for Vdiff/Vcm/VIH limits that are on p.5 and added a <20 µW figure not in the pin table
  • ✓Footprint vs RKS0020A (p.20-21): 21 pads, e = 0.50 mm; pin 1 on the top edge at the left (top view), 2-9 down the left side, 10/11 on the bottom edge, 12-19 up the right side, 20 top right, as the p.4 pinout; side pads 0.86 x 0.27 at x = ±1.185 (centres 2.37 apart vs TI's (2.3)), end pads at y = ±2.185 (4.37 vs TI's (4.3)); TI's example pads are 0.6 x 0.25, so these are longer and slightly wider and cover terminals b 0.2-0.3, L 0.3-0.5 at the 2.4-2.6 x 4.4-4.6 body edge; pad width 0.27 is under b max 0.30 (TI's own land is 0.25)
  • ✓Exposed pad 21 is 1.00 x 3.00 mm at the centre, equal to the drawing's exposed thermal pad 1 ±0.1 x 3 ±0.1 and TI's (1) x (3) land (p.20-21)
  • •3D body 2.50 x 4.50 x 0.80 mm against 2.4-2.6 x 4.4-4.6, 1 max (p.20); long axis along the footprint's y, pin-1 mark at the top-left end (matching GLB), seated on z = 0. The model is TI's generic RKS package model (source name LSF0108RKSR), not part-specific
  • ✓DigiKey 296-42174-2-ND (tape and reel; DigiKey product URL names HD3SS3212RKSR) and Mouser 595-HD3SS3212RKSR kept and added to specs; orderable HD3SS3212RKSR is the 0 to 70 °C RKS 20-pin part (p.4)
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Texas Instruments)
Verified files✓ hd3ss3212rksr.kicad_sym✓ hd3ss3212rksr.kicad_mod✓ hd3ss3212rksr.step
9 Oct 2026Claude (AI build)1 of 21 pins have no datasheet description yet (pins 21).superseded
reviewfor all variants
  • •1 of 21 pins have no datasheet description yet (pins 21).
9 Oct 2026Claude (AI build)The source 3D model is TI's generic RKS package model (named LSF0108RKSR); body dimensions...superseded
reviewfor all variants
  • •The source 3D model is TI's generic RKS package model (named LSF0108RKSR); body dimensions match the RKS package but it is not part-specific.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • •20 of 21 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! hd3ss3212rksr.kicad_sym! hd3ss3212rksr.kicad_mod✓ hd3ss3212rksr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component metadata and pin table

Caleb ·e7d2464d47 ·21d ago ·parent 6621fbc
1 file changed +251−30
page.json+251−30
page.json+251−30
@@ -1,28 +1,35 @@ {   "schema_version": 1,-  "slug": "hd3ss3212rksr",   "type": "component",-  "kind": "component",+  "slug": "hd3ss3212rksr",   "title": "HD3SS3212RKSR",   "brief": "Texas Instruments Analog Switches - Special Purpose, TQFN-20-EP(2.5x4.5). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.",   "version": "0.1.0",-  "because": "No wiki page exists for this MPN: cross-referenced every BOM line of the Adom board pages against all 25,496 hardware pages on 2026-10-07; this part had no match by MPN or LCSC number.",-  "hero": {-    "type": "billboard",-    "headline": "HD3SS3212RKSR",-    "subhead": "Texas Instruments Analog Switches - Special Purpose",-    "screenshot": "docs/hero.png",-    "chrome": false-  },+  "license": "NOASSERTION",+  "tags": [+    "component",+    "interface",+    "hd3ss3212rksr",+    "board-derived",+    "staged-for-validation"+  ],   "component": {     "mpn": "HD3SS3212RKSR",     "manufacturer": "Texas Instruments",     "package": "TQFN-20-EP(2.5x4.5)",-    "pin_count": null,+    "pin_count": 21,     "category": "Interface",     "subcategory": "Analog Switches - Special Purpose",-    "body_size": null,-    "parts": {},+    "datasheet": "https://www.ti.com/cn/lit/gpn/hd3ss3212",+    "parts": {+      "symbol": "hd3ss3212rksr.kicad_sym",+      "footprint": "hd3ss3212rksr.kicad_mod",+      "model_3d": "hd3ss3212rksr-etched.glb",+      "model_3d_plain": "hd3ss3212rksr.glb",+      "model_3d_step": "hd3ss3212rksr-etched.step",+      "model_3d_step_plain": "hd3ss3212rksr.step",+      "lbr": "hd3ss3212rksr.lbr"+    },     "distributor_links": {       "digikey": {         "part": "296-42174-2-ND",@@ -37,31 +44,245 @@         "url": "https://www.lcsc.com/product-detail/C129320.html"       }     },-    "datasheet": "https://www.ti.com/cn/lit/gpn/hd3ss3212"+    "pins": [+      {+        "number": "1",+        "name": "RSVD1",+        "type": "output",+        "description": ""+      },+      {+        "number": "2",+        "name": "OEN",+        "type": "input",+        "description": "Active-low chip enable. L: Normal operation. H: Shutdown. Input high voltage 2 V to VCC; input low voltage -0.1 V to 0.8 V. [datasheet p.3]"+      },+      {+        "number": "3",+        "name": "A0P",+        "type": "bidirectional",+        "description": "Port A, channel 0, high-speed positive signal. Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "4",+        "name": "A0N",+        "type": "bidirectional",+        "description": "Port A, channel 0, high-speed negative signal. Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. [datasheet p.3]"+      },+      {+        "number": "6",+        "name": "VCC",+        "type": "power_in",+        "description": "3.3-V power supply. Recommended operating range 3.0 to 3.6 V. Active current typ 0.6 mA, shutdown current typ 5 µA. [datasheet p.3]"+      },+      {+        "number": "7",+        "name": "A1P",+        "type": "bidirectional",+        "description": "Port A, channel 1, high-speed positive signal. Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "8",+        "name": "A1N",+        "type": "bidirectional",+        "description": "Port A, channel 1, high-speed negative signal. Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "9",+        "name": "SEL",+        "type": "input",+        "description": "Port select pin. Internally tied to GND via a 100-kΩ resistor. L: Port A to Port B. H: Port A to Port C. [datasheet p.3]"+      },+      {+        "number": "10",+        "name": "RSVD2",+        "type": "output",+        "description": ""+      },+      {+        "number": "11",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. [datasheet p.3]"+      },+      {+        "number": "12",+        "name": "C1N",+        "type": "bidirectional",+        "description": "Port C, channel 1, high-speed negative signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "13",+        "name": "C1P",+        "type": "bidirectional",+        "description": "Port C, channel 1, high-speed positive signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "14",+        "name": "C0N",+        "type": "bidirectional",+        "description": "Port C, channel 0, high-speed negative signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "15",+        "name": "C0P",+        "type": "bidirectional",+        "description": "Port C, channel 0, high-speed positive signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "16",+        "name": "B1N",+        "type": "bidirectional",+        "description": "Port B, channel 1, high-speed negative signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "17",+        "name": "B1P",+        "type": "bidirectional",+        "description": "Port B, channel 1, high-speed positive signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "18",+        "name": "B0N",+        "type": "bidirectional",+        "description": "Port B, channel 0, high-speed negative signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "19",+        "name": "B0P",+        "type": "bidirectional",+        "description": "Port B, channel 0, high-speed positive signal (connector side). Differential signaling up to 1.8 Vpp, common-mode 0-2 V. 20 kΩ internal pulldown switched in when port is not selected. [datasheet p.3]"+      },+      {+        "number": "20",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. [datasheet p.3]"+      },+      {+        "number": "21",+        "name": "PAD",+        "type": "power_in",+        "description": ""+      }+    ],+    "provenance": {+      "factory_chain": {+        "pipeline": "adom-parts (board-derived) 0.1",+        "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",+        "at": "2026-10-08"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/hd3ss3212",+        "pages": 25,+        "sha256": "8705f74edcc5c08b08aa1b45212f787d1fe1fd86532405588b7dbd0138997126",+        "source_tier": "lcsc"+      },+      "cad": "Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export",+      "pins": {+        "total": 21,+        "described": 18,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "hd3ss3212rksr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          2.5,+          4.5,+          1.0+        ],+        "zmin_mm": -0.0,+        "footprint_binding": "identity",+        "sha256": "06e9b308ad8d3fed4f7a36fa36fb661dfd9feed1ccfac283eeabad9ece45095f",+        "checked": "2026-10-08",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      },+      {+        "file": "hd3ss3212rksr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          2.5,+          4.5,+          1.002+        ],+        "zmin_mm": -0.0,+        "footprint_binding": "identity",+        "sha256": "ad7fb99f4f5bc1af6babafdb991f4867f269ed84fc84629d198dcecda3b2fa1b",+        "checked": "2026-10-08",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      }+    ]   },-  "tags": [-    "component",-    "interface",-    "hd3ss3212rksr",-    "board-derived",-    "staged-for-validation"+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "TQFN-20-EP(2.5x4.5)",+      "Category": "Interface",+      "Pins": "21",+      "LCSC": "C129320"+    }+  },+  "variants": [],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"   ],   "discovery_triggers": [     "hd3ss3212rksr",     "hd3ss3212rksr"   ],-  "license": "NOASSERTION",-  "visibility": {-    "public": false-  },+  "discovery_pitch": "HD3SS3212RKSR (Texas Instruments) component page: pinout, KiCad symbol, footprint and 3D.",   "author": {     "name": "Caleb",     "email": "[email protected]"   },-  "sample_prompts": [],-  "discovery_pitch": null,-  "metadata": {},-  "created_at": "2026-10-08T18:29:37.431Z",-  "updated_at": "2026-10-08T18:29:37.431Z",-  "org": "adom"+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "verification.json",+    "hd3ss3212rksr.kicad_sym",+    "hd3ss3212rksr.kicad_mod",+    "hd3ss3212rksr-etched.glb",+    "hd3ss3212rksr-etched.step",+    "hd3ss3212rksr.glb",+    "hd3ss3212rksr.step",+    "hd3ss3212rksr.lbr",+    "docs/hero.png",+    "docs/hd3ss3212rksr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": {+    "public": false+  } }\ No newline at end of file